PDA

View Full Version : Zafira EDC16C39 Swirl flaps + dpf off



flashtech
17th April, 2018, 08:40 AM
Hi guys!
Could someone can help and make this file swirl flaps and dpf off?
I know how to make dpf off correct for other sw but this one is different.

Ecusafe and volta ar bad because deleting most of dtc table.

Opel Zafira EDC16C39 / 0281014024 / A50316

Thanks!

johak
17th April, 2018, 08:54 AM
here you go

flashtech
25th April, 2018, 06:10 PM
Maybe someone can help with swirl flap problem?
johak tried to help, but no luck at the moment (BIG thanks to him).
Swirl flaps and actuator are unplugged and there is limp mode and errors P2075 and P0660 appear - however, they are deleted in file.
If someone have solution please help. ORI file is in first post.

voltechcar
25th April, 2018, 06:34 PM
I have, good emulated in maps and work. Dtc off never work in this car.

flashtech
25th April, 2018, 06:35 PM
I have, good emulated in maps and work. Dtc off never work in this car.
Can You share it please?

voltechcar
25th April, 2018, 06:38 PM
I do dpf and flaps, wait 20 minutes

voltechcar
25th April, 2018, 07:39 PM
pass pm, write

flashtech
25th April, 2018, 07:44 PM
Thanks!
Writing now. Will update post when done.

EDIT.
Car is still in limp mode, can rev it till 2000rpm. And there is still errors P2075, P2279 and P0660 :(

johak
25th April, 2018, 08:00 PM
what tool did you use to write BDM?

flashtech
25th April, 2018, 08:01 PM
K-TAG. Never had problems before.

johak
25th April, 2018, 08:03 PM
k-tag is ok

voltechcar
25th April, 2018, 08:15 PM
Now I watch the match, then I will do v2

voltechcar
25th April, 2018, 08:52 PM
try this......

johak
25th April, 2018, 08:53 PM
if you want try this

flashtech
25th April, 2018, 09:10 PM
Thank You very much guys! I will try in the morning and then will update this post.

flashtech
26th April, 2018, 09:12 AM
Just tested files, errors P2075 and P0660 still present, can rev car only till 2000k rpm. I think there is something else wrong. Will try to figure out what's wrong (I think there is possible problem with EGR) and then will update post.

mancioks
26th April, 2018, 11:51 AM
Try this for limp mode. This is just for swirl. If works can do this mod on dpf files u already have.

voltechcar
26th April, 2018, 03:21 PM
use sps, get up software and upload software again

flashtech
26th April, 2018, 05:02 PM
Try this for limp mode. This is just for swirl. If works can do this mod on dpf files u already have.
With this file I have only one error P2075, second one dissapeared. But i still can rev car only till 2k rpm when error appears. If I stop engine wait one minute and then start again - car revs ok till error P2075 comes back. Will think where I can get sps.

Ignasvw
26th April, 2018, 05:17 PM
Wait 20 mins i will do my solution

AVDigitale
26th April, 2018, 05:43 PM
try this pass in PM!

Ignasvw
26th April, 2018, 06:22 PM
This one should work

flashtech
26th April, 2018, 07:19 PM
Thanks guys!
Tommorow will test them and then update post.

flashtech
2nd May, 2018, 08:19 AM
Back to this one :
I tried all of those files and some another files, but there was still problems with that car.
So i gaved up on that car, seems like there is something wrong with ECU.
One more time BIG THANKS to all of guys who tried to help me, i really appreciate that!

Ignasvw
2nd May, 2018, 08:26 AM
I can delete limp mode at all if you want. you can try

flashtech
2nd May, 2018, 08:43 AM
Thanks, but it's not worth it, because car has some mechanical problems too.