View Full Version : Ford focus 2006
FIRAS72
18th April, 2018, 10:26 AM
Hello Guys,
I have here a Ford focus 2006 with ecu broken.
I have read eeprom EDC16 and Read 1k78x dash eeprom
Can someone help me with synchro ecu and dash
Can somebody help to run this car again.
kiszka
18th April, 2018, 12:06 PM
..........
FIRAS72
18th April, 2018, 01:46 PM
I NEED PASS I DON'T RESIVED IT
FIRAS72
18th April, 2018, 03:18 PM
don't whork
FIRAS72
19th April, 2018, 09:28 AM
synchro
press button rep.
hi thank you for your help
but you send me a wrong file it is not my file
please check it
kiszka
19th April, 2018, 09:41 AM
..........
FIRAS72
19th April, 2018, 10:27 AM
don't work i have dtc p2139
kiszka
19th April, 2018, 10:36 AM
don't work i have dtc p2139
..............
FIRAS72
19th April, 2018, 11:12 AM
..............
car don't start i have 2 dtc
dash:
B2139 "Data Mismatch (receive data does not match what was expected)" Status: 60
No Additional Fault Symptom Available for this DTC
DTC Present at Time of Request
MIL Off for this DTC
ecu:
P1621 "Immobilizer Code Words Do Not Match" Status: 64
No Signal/No Signal Change
DTC Present at Time of Request
MIL Off for this DTC
FIRAS72
20th April, 2018, 09:34 AM
any ather solution ???
FIRAS72
26th April, 2018, 10:22 AM
any ather solution ???
i find other dash and ecu
now i need syncro
kiszka
26th April, 2018, 02:00 PM
..........
carlab237
6th August, 2018, 10:13 AM
Hi
Please help ford focus syncho547181
Envoyé de mon HTCD200LVW en utilisant Tapatalk
kiszka
6th August, 2018, 12:10 PM
..........
carlab237
6th August, 2018, 12:34 PM
the file is modified
there are two keys physicallyPlease don't understand
Envoyé de mon HTCD200LVW en utilisant Tapatalk
kiszka
6th August, 2018, 01:38 PM
..........
carlab237
6th August, 2018, 02:21 PM
I am asking for the original dump eeprom ECU files
if you claim that these files are original, then sychro is okIts the original ecu dump, but security light keep blinking and car wouldn't crank
Envoyé de mon HTCD200LVW en utilisant Tapatalk
kiszka
6th August, 2018, 03:13 PM
..........
carlab237
6th August, 2018, 04:25 PM
program the keys againHow?
Via obd once the programmer cn100 enter programming mode and it displaced
"Security access 800seconds "
The dashboard goes off automatically and only turn on after the elapsed time of 800seconds. Failed
Envoyé de mon HTCD200LVW en utilisant Tapatalk
kiszka
6th August, 2018, 04:39 PM
..........
carlab237
6th August, 2018, 05:05 PM
No, would try another
Envoyé de mon HTCD200LVW en utilisant Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.