Problems with siemens bsi (95160 ee) when I try to change milinage or clone to donor

[alclot]

Hi mates! I have big problem on siemens bsi with 95160 ee. Now I´m trying to program 95160 by io terminal and soldering directly it in donor bsi but when take power supply and read again the ee then the information of ee change. Like virgin. If I put come back file of donor bsi then after take off power the information is the same. Same problem If I try to change milenage. I´m testing on bench. I dont have the car. What do you thing? Can anybody give me a tips how to solve this situation?
The reference of bsi which I´m triying is S118085300 K but I have the same situation in all siemens bsis with 95160.
Thanks in advance ;)

[unobayu]

what car? peugeot 206?

[alclot]

Citroen C3

[tech_cz]

You can not change Eeprom or dump to another BSI.
You can transfer immo data from one BSI to another by OBD (diag. on table) with AVDI, SMOK etc...
If you want to use another BSI (and can not transfer immo, configuration), you have to virginise it (best is original dump from that BSI).
If you just wanna change mileage, do it in original BSI and do it well.

WBR, Marek

[alclot]

I can transfer immo data by avdi on canbus bsi but now in k-line bsi. Can you help how to do that?


You can not change Eeprom or dump to another BSI.
You can transfer immo data from one BSI to another by OBD (diag. on table) with AVDI, SMOK etc...
If you want to use another BSI (and can not transfer immo, configuration), you have to virginise it (best is original dump from that BSI).
If you just wanna change mileage, do it in original BSI and do it well.

WBR, Marek

[tech_cz]

No way. Only virgin.

WBR, Marek

[unobayu]

in peugeot 206 (i think its same siemens bsi) i can swap immo by swap data 95160. only by copy data without desoldering. if desolder the 95160 then i got problem..

[unobayu]

same thing i do for peugeot 307 bsi (valeo)