fiat doblo remote key 2015

[bringo029]

hi friends someone has an idea how to adapt remote key fiat doblo 2015 i put the pin the car start but the remote it does not work
thanks in advance

[p1et]

With what tool you precoded key?

[autochei]

he forgot to make precod before learning

read 9386 put in programer to make precod and then u can learn in the car

[bringo029]

I read epprom 93c86 and i make precode and learn in the car with abrites but remote no work

[autochei]

bad remote. try another remote sh oem and move only 7946

[bringo029]

i make precode with tm100 and learne with diagnostic delphi i change the remote but no work

[rapidlocksmiths]

the chip has coded in but not the remote , so will be just 1 of 2 issues normally ;

1) you are using the wrong remote , i have seen only delphi on these but ive spoken to some who have had marelli remote on late combo ( same as doblo ) though most and all ive done have been delphi .

2) more likely is you havnt precoded the remote , you have precoded the transponder if car starts but not the remote control , very few machines succeed to precode the remote control , abrites with fn017 licence , zedfull and TMpro 2 with correct licences are all that i know of that do this correctly , tango and most others do not properly precode these

[p1et]

i make precode with tm100 and learne with diagnostic delphi i change the remote but no work

Tango does not precode remote for Fiat (only transponder) and TM100 is copy of Tango so that's why remote doesn't work. Beside devices mentioned above, Miraclone does remote precoding for Fiat also.

[rapidlocksmiths]

i keep forgetting miraclone , my bad i should have known that peter and lockdecoders would have cracked this too , so miraclone will precode these too.

if you have original avdi with FN017 licence , you should be able to whole job by obd with no need to use a dump tool , avdi does these by obd and precodes remote all in just a few minutes , just prepare correct remote , 8 smd if oem marelli , or 10-16 smd if aftermarket marelli and delphi remotes .
ive not had abrites fail on one of these by obd yet , seamless and quick.

and as has been said tango doesnt precode the remotes , so tm100 wont either .

[sasa lima]

use um pino de 5 dígitos, escreva via obd com t 300, x 100
use um pino de 5 dígitos, escreva via obd com t 300, x 100

[sasa lima]

​Send me the file, I'll get the pin

[rapidlocksmiths]

he has the pin code already and he has succesfully precoded the transponder and coded the transponder to the car , it is the remote he cannot prepare and code as hasnt been prepared by his kit .

[armpower]

Excuse me for my stupid question.
The old key have the remote?
I ask you because some doblo' haven't remote closing function.
Only manual centralised door lock.
If the van came without remote key, check with Vin if your van have remote option.
I have coded several remote (also china) without problem.Precoded with Tmpro and AVDI.

Cheers

[rapidlocksmiths]

yes tmpro and avdi will precode the remote , the tm100 he used will not

[testourii]

key learnt by abritus with remote precoded by tango