nissan D22

[ninja123]

I need to program a key to this, 2006 model, immo around ignition.

No comms with any tool that I have (AD AVDI and all china stuff)

I take off ring and read it with AVDI, then try to program a transponder, says success, but now immo dont even try to read a transponder! but engine will start and run for only one time, then nothing, still wont read transponder.

If I write ori dump back, then it trys to read a transponder again.

any idea's what i can do?

[klaudio]

This model uses 4d60 transponder, if you're using id46 it won't work. these are pretty easy by obd2, check fuses if no com by obd2, pin code 5011.

[ninja123]

all fuses checked, ive done by OBD and on bench with AVDI in the past, but not this one :(

Yes, I am using ID60 transponder.

I have power at pin 8 and ign power on pin 7 of immo and earth on pin 4, so must be k line issue.

If I link pin 1 from immo to pin 7 OBD this should give me comms, I will try this next.