View Full Version : Verification of tuning Insignia 2.0 EDC17C19
seba_m_
23rd April, 2018, 08:43 PM
Hi all. Please, check the correct tuning of my car. The car after tuning does not feel the difference and very smokes. The tuner says that it is well tuned and does not accept complaints. Can anyone help?
Thank you in advance.
AVDigitale
23rd April, 2018, 09:46 PM
not good tune ,this car from 130 hp can going up to 165-170 stage 1 ,and you feal the power after remap
seba_m_
23rd April, 2018, 10:00 PM
Will anyone help me improve this?
Meck
23rd April, 2018, 10:54 PM
Wtf this mode file are kaos dont write that in the car, here is the nice stage 1
523467
seba_m_
24th April, 2018, 06:59 AM
Password??
NOX
24th April, 2018, 09:06 AM
Hi all. Please, check the correct tuning of my car. The car after tuning does not feel the difference and very smokes. The tuner says that it is well tuned and does not accept complaints. Can anyone help?
Thank you in advance.
hi friend,
many important maps are missing
max power dynotest 205HP + 80Nm dpf off
seba_m_
24th April, 2018, 09:14 AM
fiend, dpf I can switch off without a problem, I need to improve this software to prove to the tuner that it has done a bad job.
maajkii
24th April, 2018, 09:42 AM
send him screenshots :D
and change tuner.
kingarthas
9th June, 2018, 02:08 PM
Hi all. Please, check the correct tuning of my car. The car after tuning does not feel the difference and very smokes. The tuner says that it is well tuned and does not accept complaints. Can anyone help?
Thank you in advance.
Hah, I see much worst... Compare to what I have seen this is quite good. Only mistake did not switched off Nm2IQ monitoring, however de-calibrated it. It is not EDC16 and will not work.
Injection monitoring is properly disabled so although not plausible it will work same why as in EDC16.
Missed:
EngPrt_trqLim_CUR
RngMod_trqSpd_CUR
SmkLim_rLamBas1 & 2 (instead unnecessarily tune 3 & 4)
As I said, quite better then most I`ve seen...
kingarthas
9th June, 2018, 02:16 PM
hi friend,
many important maps are missing
max power dynotest 205HP + 80Nm dpf off
Not so many, having in mind that he decalbrate duration.... so all that miss to this tune are dozen of rail maps and NM2IQ original values.
autoSP
9th June, 2018, 07:37 PM
change ur tuner
ernis1554
7th May, 2019, 04:17 AM
What's password for this map?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.