Elantra 2017

[manuel112099]

Hello, could someone help me to know why an error occurred while trying to write a Fujitsu MB91F061 processor in an Elantra 2017 with SMOK UHDS ...? Ask for help from the SMOK technical service, but do not answer.

[automotrizVIP]

you have bad reading, read again

[hoangtu]

Why do not you use 061 instead of 067? Memory is different!

[manuel112099]

Thanks for your help.......How do you know that reading is wrong? ...

[manuel112099]

I did not know what kind of processor it was, and I realized that the program autodetects it, it's the first time I used it, I read it well, supposedly, at least it showed in the software, but it did not write.

[manuel112099]

When the error happened the dashboard stopped working, then, I wrote the backup again and it was fixed.

[gagopc]

check the MCU model number and use the correct soft for it .
Elanter 2017 have 3 MCU model number .

[digimile]

hi
even u successfullly write when uhds ask u version recognise...press ok then reset trip A and B and press ok then on off two times and press ok after 4 min. old km back in the dash....some one also has in same boat share their experience
thanks

[beter]

this problem i see it i have smoke and try to write give me error 7f 7f 7f fffff i solve problem by press write agin if error message prss write agin and agin after that work good sir and do it mb91