Toyota AYGO Remote syncro procedure

[shooting]

Hi all does anyone know how to add remotes to a 2005 Toyota AYGO?
I have second hand electronics and want to pair them with the car...
The car is missing the master key, I only have the valet key
(Transponder isn't a problem, it's a simple ID67)

wbr :)

[rapidlocksmiths]

Ignition switch in “OFF” position and driver’s door open. This procedure must be completed within two minutes:
1. Switch the ignition on and then off
2. Close and open the driver’s door twice - door ends up in the open position
3. Switch the ignition on and then off
4. Close and open the driver’s door twice - door ends up in the open position
5. Close the driver’s door
6. Lock using the door lock button on the door
7. Switch the ignition on and then off
8. Unlock using the door lock button on the door - the locks will cycle
9. Remove key from ignition, briefly press and release both lock and unlock buttons on the remote
10. Press and release lock button on the remote

[shooting]

Ignition switch in “OFF” position and driver’s door open. This procedure must be completed within two minutes:
1. Switch the ignition on and then off
2. Close and open the driver’s door twice - door ends up in the open position
3. Switch the ignition on and then off
4. Close and open the driver’s door twice - door ends up in the open position
5. Close the driver’s door
6. Lock using the door lock button on the door
7. Switch the ignition on and then off
8. Unlock using the door lock button on the door - the locks will cycle
9. Remove key from ignition, briefly press and release both lock and unlock buttons on the remote
10. Press and release lock button on the remote

Will this work even tho the electronics are from another car?

wbr

[rapidlocksmiths]

yes the remotes are reusable , as long as correct remote

[newone]

you can use kd flip toyota new design if you want also for better look,works just fine.

[shooting]

you can use kd flip toyota new design if you want also for better look,works just fine.

Thanks... this is what I have :D

wbr

[newone]

not bad my friend,for my especially for aygo i always use this with denso sticker on top and aluminium toyota logo,it is not original but it looks very nice i think and it does not break
525319

[shooting]

Can someone tell me if the remote has to be programmed at the same time as the transponder?
or can it be programmed at a later date?

wbr :)

[rob h]

Remote is learned separate.

[shooting]

Remote is learned separate.

I know it can be re-synced at later time but was unsure if initial programming had to be done first :)

Thank you :D

[ghostrider72]

No it don't have to. I remember once I've learned remote first, than after about 1h immobiliser.

[tab99_uk]

Ignition switch in “OFF” position and driver’s door open. This procedure must be completed within two minutes:
1. Switch the ignition on and then off
2. Close and open the driver’s door twice - door ends up in the open position
3. Switch the ignition on and then off
4. Close and open the driver’s door twice - door ends up in the open position
5. Close the driver’s door
6. Lock using the door lock button on the door
7. Switch the ignition on and then off
8. Unlock using the door lock button on the door - the locks will cycle
9. Remove key from ignition, briefly press and release both lock and unlock buttons on the remote
10. Press and release lock button on the remote

will this work for a 2010 model aygo.

[fred77]

been well posted millions of times info is available on countless forums

Use those fingers with google.