PDA

View Full Version : evaluate tuning



bigjay88
5th May, 2018, 02:23 PM
hi guys,

so I have asked from somebody to delete a dpf for a 1.6 TDI SKODA FABIA 2011

after I paid him for his service and write mod file, the car is keep going to regen mode, and he is saying this is not because of tuning.

this does not make sence

I have attached the file he did for me, I hope someone can assist and advice if file is ok or no.

thank you

gmon16
5th May, 2018, 04:44 PM
add original file also

MYMN
5th May, 2018, 04:52 PM
why you pay for a tuned file that you can get for free ????

use DPF/EGR remover, it works perfectly on this ecu (PCR2.1)

maajkii
5th May, 2018, 05:32 PM
why you pay for a tuned file that you can get for free ????

use DPF/EGR remover, it works perfectly on this ecu (PCR2.1)

lol, dpf not work for shure.

Ignasvw
5th May, 2018, 08:14 PM
removing egr on this ecu,always make problems with regenerations. Usually it stops at all

MYMN
5th May, 2018, 10:21 PM
lol, dpf not work for shure.


It works perfectly on pcr2.1 ..tested on several cars jeta, ibiza, golf6, caddy, .. DPF + EGR OK without problem. ...I know what I said

maajkii
5th May, 2018, 10:46 PM
Work and good are two different things..
better check what this shit make in dump..
Its same like opel 16c39, file work but all dtc are deleted!

sdtsedat
6th May, 2018, 10:56 AM
I have doned pcr remove egr with ads, after 2 days customer call me, dpf light and again emergency.

I check, no more regeneration??
So what maajki say is correct, better do manual.


Verstuurd vanaf mijn SM-G955F met Tapatalk

bigjay88
6th May, 2018, 01:00 PM
add original file also

attaching original file

bigjay88
6th May, 2018, 01:02 PM
why you pay for a tuned file that you can get for free ????

use DPF/EGR remover, it works perfectly on this ecu (PCR2.1)

my friend

for sure you are using remover on kess v2 old protocol

I have used it on new protocol and killed the ecu

I don not recommend anybody to use it on new alientech protocol

MYMN
6th May, 2018, 03:01 PM
my friend

for sure you are using remover on kess v2 old protocol

I have used it on new protocol and killed the ecu

I don not recommend anybody to use it on new alientech protocol

No, I use galletto v54 clone, unlock+ flash via obd