PDA

View Full Version : Sid804 dtc off need help



DjRomeoR
8th May, 2018, 10:00 AM
Hello,


Can someone explain i try read with :
i/O terminal via OBD ,but dtc structure not find.
Unsolder flash - dtc structure not find :/
Galleto in boot mod - dtc structure not find

Maybe someone know Citroen C3 1.4 HDi SID804, need help with these DTC's:
P1351
P1352
P0571
P0573


I can pay for the solution. http://www.~~~~~~~~~~~~~~~~~~~~~~~~~~~/images/smilies/handshake.gif
Thank you for any help.

johak
8th May, 2018, 10:51 AM
hi
try this

DjRomeoR
8th May, 2018, 11:35 AM
Can you do CS because galleto wont do it when write and i dont have winols damos

johak
8th May, 2018, 11:37 AM
here checksum ok

DjRomeoR
8th May, 2018, 11:52 AM
here checksum ok


Now showing :
0000 Unknown fault
0000 Unknown fault

i think you delete only name of the fault

johak
8th May, 2018, 01:05 PM
try with this

DjRomeoR
8th May, 2018, 01:37 PM
try with this

everythink is same nothink change:

0000 Unknown fault

DjRomeoR
8th May, 2018, 02:52 PM
So nobady can do dtc off + cs ?

bobolin4o
8th May, 2018, 05:06 PM
Have you limp mode with ori, or mod files?
Have you MIL with johak's file (with P0000)?

DjRomeoR
8th May, 2018, 06:20 PM
Have you limp mode with ori, or mod files?
Have you MIL with johak's file (with P0000)?

limp mode with ori file:
P1351 - Glow plug no signal

i cheked all wiring , glow plugs , glow reley - all fine

when car cold after night all fine no engine light on cluster ,but when start a car after 1-2min come engine light and car in limp mode.
With johak's are same ,limp mode ,only when cheking fault codes write 0000 - unknowing fault.

jacekripper
8th May, 2018, 07:18 PM
Seriously?? With deleting DTC you trying resolve limp mode?? Look into accelerating pedal data via DiagBox (ori file only). And do NOT touch P1351 and P1352.

DjRomeoR
8th May, 2018, 07:49 PM
Seriously?? With deleting DTC you trying resolve limp mode?? Look into accelerating pedal data via DiagBox (ori file only). And do NOT touch P1351 and P1352.

i just wanna to try.
with diagbox accelerating pedal is good i looked in first place.

So I understand what this ecu is really hard to delete dtc and noone can help me for money or for free :(

maajkii
8th May, 2018, 08:25 PM
i just wanna to try.
with diagbox accelerating pedal is good i looked in first place.

So I understand what this ecu is really hard to delete dtc and noone can help me for money or for free :(

after you use "money" word, your inbox will be full in 2min.

jacekripper
8th May, 2018, 08:40 PM
And vehicle still in limp mode.

bobolin4o
9th May, 2018, 11:26 AM
limp mode with ori file:
P1351 - Glow plug no signal

i cheked all wiring , glow plugs , glow reley - all fine

when car cold after night all fine no engine light on cluster ,but when start a car after 1-2min come engine light and car in limp mode.
With johak's are same ,limp mode ,only when cheking fault codes write 0000 - unknowing fault.


Mate... you have a problem with glow system.
I don't know how you checked it, but there is some fault after all.
So, check ALL again and find the problem!
Deleting errors will not solve the limp mode problem.
Regards!

DjRomeoR
9th May, 2018, 11:34 AM
Understand

Thanks ...........