View Full Version : Immo off on 406 HDI 2.0 90cv with unknown version
hrmotorsport
9th May, 2018, 02:57 PM
Hi all, a customer has left a 406 2.0 hdi without ECU unit. He say has bought as is and not know what exact version have.
he has bought some units and with one (not appears what version is) start car in limp mode, not pass from 2.000rpm
i readed flash and eprom. i cant know what exact flash or version is from car, VIN is VF38BRHYE80930532
thanks
hrmotorsport
11th May, 2018, 03:48 PM
somebody can give help to find solution?
rafal
11th May, 2018, 05:48 PM
somebody can give help to find solution?
call to dealer and ask for info about ecu
hrmotorsport
14th May, 2018, 08:22 AM
dealer giving info about reference? i know what they will say me..
morgano
14th May, 2018, 11:04 AM
For sure the ecu is EDC15C2, maybe the limp mode is because need to code injectors. What dtcs you have?
That dump you posted is from hw:0281010248 sw:1037359169
hrmotorsport
17th May, 2018, 08:53 AM
Yes, ecu is edc15c2 (one connector) i dont know if injectors are coded or not, but car start with this 0281010248 but not pass from 3000rpm
thanks for help
hrmotorsport
17th May, 2018, 12:37 PM
finally found it, with 0281010361 is working. car have another problem, unstable throttle.
thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.