View Full Version : BMW EDC16C35 DPF Off
hayk57
12th May, 2018, 06:33 PM
Hello,
I tried many solutions but every time I have message on CCC and dashboard.
SW: 1037500775
Does any one have good solution to disable DPF on EDC16CP35 E70
Thanks in advance
bmw325
12th May, 2018, 06:57 PM
Maybe this ...
hayk57
12th May, 2018, 07:59 PM
Thanks but it doesn't work I already tried switch solution. I have 452A and 4D4A errors when I switch them off, no DTC via obd but warning on CCC and dashboard.
AVDigitale
12th May, 2018, 08:19 PM
reset your dpf soot before flashing mod file after flashing mod reset dtc and try
if not work again send me pm i will make dpf off 100% testing
voltechcar
12th May, 2018, 08:50 PM
this is my manualy solution, if you like disconnect temp sensor and differential pressure sensor with dpf.
hayk57
13th May, 2018, 11:18 AM
Solved, I had to register DPF replacement( reset calculated soot mass) after or before flashing with mod file.
With introduction of the new CBS strategy for BMW diesel model (first deployment: in the E70 as of 09/2006), the remaining distance for the particulate filter can be read out via the control unit functions. As the particulate filter is no longer a CBS function, two new faults indicate limited remaining availability:
-
Fault 452A appears when the particulate filter has exceeded most of the maximum running distance and serves as information / request for competent filter replacement in the BMW workshop.
-
Fault 4D4A appears if no measures are taken despite the request for filter replacement being issued and the total running distance of the particulate filter has been exceeded.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.