PDA

View Full Version : BMW EDC16C35 DPF Off



hayk57
12th May, 2018, 06:33 PM
Hello,

I tried many solutions but every time I have message on CCC and dashboard.

SW: 1037500775

Does any one have good solution to disable DPF on EDC16CP35 E70

Thanks in advance

bmw325
12th May, 2018, 06:57 PM
Maybe this ...

hayk57
12th May, 2018, 07:59 PM
Thanks but it doesn't work I already tried switch solution. I have 452A and 4D4A errors when I switch them off, no DTC via obd but warning on CCC and dashboard.

AVDigitale
12th May, 2018, 08:19 PM
reset your dpf soot before flashing mod file after flashing mod reset dtc and try
if not work again send me pm i will make dpf off 100% testing

voltechcar
12th May, 2018, 08:50 PM
this is my manualy solution, if you like disconnect temp sensor and differential pressure sensor with dpf.

hayk57
13th May, 2018, 11:18 AM
Solved, I had to register DPF replacement( reset calculated soot mass) after or before flashing with mod file.


With introduction of the new CBS strategy for BMW diesel model (first deployment: in the E70 as of 09/2006), the remaining distance for the particulate filter can be read out via the control unit functions. As the particulate filter is no longer a CBS function, two new faults indicate limited remaining availability:



-
Fault 452A appears when the particulate filter has exceeded most of the maximum running distance and serves as information / request for competent filter replacement in the BMW workshop.


-
Fault 4D4A appears if no measures are taken despite the request for filter replacement being issued and the total running distance of the particulate filter has been exceeded.