PDA

View Full Version : Volvo S40 corrupt immo dump solution



TumiSA
13th May, 2018, 10:55 AM
Greetings Members

I have a Volvo S40 with blue immobox
Part # 30620876 Immo 3
eeprom 93C66

I have read the eeprom several times, and cleaned the eeprom. when I load on tango, Tag key tool and TM100 key makers it says unknown version. Can you please advise what solution can I use to get the car started. I have attached the Immo Dump, and help will would much appreciated. Thank you in advance

kiszka
13th May, 2018, 11:09 AM
..........

TumiSA
13th May, 2018, 11:21 AM
Hi Kiszka

Thank you for your reply, I always read the eeprom the same way when I do the Volvo S40.

The story behind this car is that the battery terminals were swapped(reverse polarity) and the vehicle never started anymore. It flashes a car with a cross on the cluster.

If the immo is dead, can I use another good dump that I read from similar vehicle? Any suggestion of how can i get the vehicle started?

kiszka
13th May, 2018, 11:29 AM
..........

TumiSA
13th May, 2018, 11:37 AM
he can use another dump immo only
you will have to do synchro ecu
but you could have killed the immobox, check another immobox

Which tool can I use to do syncro on ecu?

kiszka
13th May, 2018, 11:45 AM
..........