EDC16U1 MPPS V16 error

[bento27]

hi guys can someone please help so i´m new to this ECU stuff and i have some ECUs around and today i received my MPPS V16 clone and im trying to use it on EDC16U1, i can read and retrive id but i can not write modded files or even ori files after pressing to write i´m always geting "conditions not correct" what can i do?

[raceshadow]

MPPS clone is bad tool for EDC16.

[morgano]

On bench you can read but not write.

To write that ecu need fit in car and key allowed in immo system.

[bento27]

will galleto 4 work on bench and obd ?

[rafal]

Invest in the bdm frame and with Galletto you will write and read ecu

[morgano]

will galleto 4 work on bench and obd ?

Same as mpps, on bench via can or kline you need to pass immo secutiry or you cannot write. You could if the ecu is immo off, but not on stock ecu with immo active. Best is bdm and forget about r/w problems.

[turbozob]

Hello guys, I have disabled immo and downloaded eeprom via BDM to EDC16U34, but I still cannot write the file via MPPS v16 Error "Conditions not correct". I tried to increased voltage on power supply to 14V but without success. The thing is I have "Data only" tuned file and not the full bdm and I wanted to prepare the ECU on the bench

[rafal]

mpps not read eeprom..................

[turbozob]

No no, what I meant, I downloaded eeprom immo off via BDM KessV2 and then want to download maps/flash via MPPS but still get "Condition not correct" error. So Immo on or off, the MPPS still reports error. I have WinOLS (VW Caddy (Stage1) - 377580) which seems to be "data only" not full flash.

[rafal]

use search in google and u will find all about what tool can do or can't

[Ladis]

You´ll find that the Galletto is not enough to buy a ABRITES attention the wrong aperture clone,il will destroy the eeprom

[turbozob]

I can flash only by BDM, not OBD on the bench. But the tune file I have seems to be data only.

[spitt]

Send me the:
- BDM read file
- OBD read and tuned file
and I will make you
- BDM tuned file you can write on the bench.
I assume you bought the tuned file, because if you had done it yourself you could just modify the BDM read and forget about the OBD file.

[mwfire]

Try mpps v18 and slow speed.