2005 Smart Fortwo added 2 remotes with Abrites successfully but no start

[keysmith]

Added 2 remotes with Abrites. Doors lock and brake light blinks twice, doors unlock and brake lights blinks once. Convertible button also works. I unlock the door with the remote function and immediately try to start the car but get flashing key on cluster. Here are the trouble codes in the SAM. Any suggestions, going back tomorrow to try hard rest and jumper pack.

[godfathertre]

i would check the sam unit has they suffer from water i would also disconnect battery and reconnect and reprogram keys and clear fault codes again if sam unit is dry .

[ghostrider72]

Disconnect battery for 2min and check it

[PocketHero]

When battery disconnecting won't work, remove the ECU connectors, check 'em to be dry & clean, reconnect, and try again. I had such an error with an A class, and it was solved on this way.

[ghostrider72]

Battery tweak worked for me twice. Worth to try that.

[keysmith]

Disconnecting the battery then putting a jumper pack on worked, started right up!