Need S3000 virgin For Modus

[Ezber_Bittar]

Hi all

Is there any virgin dump for Sagem S3000 Eprom 95160
attached Informations of the 2 ECU

Thks !

[morito]

hello

try this and post reply


regards:wink:

[Ezber_Bittar]

Hi Morito

dump tested & immo not ok,

is there an other ??
thks

[morito]

hello

because not works, what is the problem?

please send me the problem

regards

[morito]

try another

please post reply

[kasim_izmir]

Hi all

Is there any virgin dump for Sagem S3000 Eprom 95160
attached Informations of the 2 ECU

Thks !

Hi, Not good this dump (95160 s3000off)
I am sending virgin dump for S3000 ecus
You can you this dump an 1400 and 1600 motors
I use this dump more times

Greetings
kasim

[Ezber_Bittar]

Hi & Thks for all

the car doesen't start with its ECU, it's a problem of immo
when u turn the key to +ACC the red light on the dash stays fix.

So i would program the car with a virgin one {that's the problem guy}

I'll test all posted dumps & give u then result as soon as finished. Regards

[hamza338]

HI
TRY THES:wink:

[szwajcarek]

Hi
Ezber_bittar you have problem with immo so there is no sense to adapt new ecu to the system. Ask someone for immo off dump wich I think is not available yet.

Regards

[Ezber_Bittar]

hi
exactly sir, i've tried all the posted dumps without a result, i think so that it has no solution yet ...
Thks for all again

[bachlar]

thanks for all

[Anatoliy_st]

Hi, Not good this dump (95160 s3000off)
I am sending virgin dump for S3000 ecus
You can you this dump an 1400 and 1600 motors
I use this dump more times

Greetings
kasim
Hello, I need a virgin dump for sagem s3000 vehicle is 1.6l mechanical . Can I use this dump to my ECU?
Thank you, and sorry for my bad English

[jaca4591]

kasim_izmir (http://www.digital-kaos.co.uk/forums/members/81447-kasim_izmir/) Thank you. This works:beer:

[darwins]

Can anyone help me with a total Vigin file for a S3000 1.4.

kasim_izmir (http://www.digital-kaos.co.uk/forums/members/81447-kasim_izmir/) file is spot on if you want to swop ECU configured like for like and allow immobiliser to simply relearn with ignition on.

I have a good 1.6 Auto ECU which i want to take back to total virgin state to enable programming upto car with Clip. The 1.6 & 1.4 ECU part number is the same.

the configure data can not be changed as far as i see it, tried reprogramming using the chassis number of the car the part is fitted to but its not working.

On a seperate note can anyone point me in the direction of a Renault programming calculator?

Thanks in advance

Darwins..

[Nourd]

Hello freind plz i have sam problem with modus