polo 6r cluster dead

[Dejfat]

hi. i was doing a vw polo 6r jc 95320 with fvdi and the cluster just went dead and car can not start. any help please

[Nicolas9]

try reset battery for few minutes?

[Dejfat]

i did for over 30min

[Nicolas9]

did you exit service mode?

[Dejfat]

i did not use service mode

did you exit service mode?

[PierreTheron]

dID YOU READ EEPROM AND SAVE IT ???

hERE vIVO 2011 DASH file 2011
10b TO 10C CONVERT DEC TO HEX AND YOU HAVE PIN

[Dejfat]

i did not read before re calibration. i read the eeprom now and it is corrupt. i tried another dump from dk dash came on but no immo

[PierreTheron]

What year model your car m8 ?

What number ecu in the vehicle ??

Get pin from ecu
Take another dash file
Reset file with pin from dashfile and then code pin from ecu to dash file and job done ..

Always make backup off any files where possible ....

[Dejfat]

the car is 2014

[Dejfat]

here dump file

[PierreTheron]

Can please put file from other dash on dk here so we can get pin ???

[Dejfat]

file from dk to compare

[sendreq]

Do you still have communication with dash?
If yes, then:
1. Try to read the IMMO data. Maybe it is not corrupted.
2. Try to redo the procedure.

If no - find someone who can extract the IMMO data from engine ECU and then prepare new (second hand) instrument cluster.

[sendreq]

What year model your car m8 ?

Get pin from ecu
Take another dash file
Reset file with pin from dashfile and then code pin from ecu to dash file and job done ..
.

This is not IMMO3 anymore, it will not work like that.

[Gleb068]

do you have anything to put the keys? if Yes, then read motor and the panel, out with the file, do sync, and the keys itself you will guess, with the ABS coding was not flown?

[Dejfat]

i can not read anything on the cluster. i need a dump from a cluster with thesame number to compare
polo 1.2 tdi bluemotion 6r0920861m dump

[vasa]

hi remove dashboard and power up on bench.

[Dejfat]

do you have power up connection?

[sendreq]

Try it:
31 and 32 +
16 -

[Dejfat]

Try it:
31 and 32 +
16 -

I tried this . Still blank

[Dejfat]

thanks to everyone who attempted to help. i am happy to let you all know that i managed to repair my dump . car started and everything is ok. but km went back to the old km.

[sendreq]

Happy to hear that it is sorted.
Can you share the info how did you fix the dump?

[Dejfat]

Happy to hear that it is sorted.
Can you share the info how did you fix the dump?
I compared my dump with a similar dump, than i just copied the first few lines to my dump and the car was fine.

[PierreTheron]

Now read dump and save it ..
Use cheap vagtacho and incorrect the km again m8 ...
At least you can get back to original repaired file ...

[Dejfat]

Now read dump and save it ..
Use cheap vagtacho and incorrect the km again m8 ...
At least you can get back to original repaired file ...

Thank m8. I just check for vagtacho 5.0 there is no mention of nec with 95320 only c32 and c64. Did you try 95320 Johnson control

[PierreTheron]

Just use vdo dash on it ...

[Dejfat]

thanks for the info. i will buy one and try