View Full Version : Mitsubishi Mirage 2017 pinout or solder points connection please
llanesluna
24th May, 2018, 10:03 PM
It has the new ultra small c66 but I suspect I can solder some points to the cluster to perform the mileage programming.
See attached pictures.
https://uploads.tapatalk-cdn.com/20180524/f3825298668d9b464535f502a366d572.jpg
https://uploads.tapatalk-cdn.com/20180524/543c393bff790f62cade75c7ee7e62dc.jpg
Sent from my iPhone using Tapatalk
mfreedom
25th May, 2018, 01:56 AM
YOU HAVE TO REMOVE IT EASY
llanesluna
25th May, 2018, 02:04 AM
YOU HAVE TO REMOVE IT EASY
Easy to remove, very hard to put it back!!
Sent from my iPhone using Tapatalk
hcip
25th May, 2018, 02:22 AM
Easy to remove, very hard to put it back!!
Sent from my iPhone using Tapatalk
it can read/write by Stool/Mtool via Denso connection without opening the cluster
I think some tool with denso software can also do it...
llanesluna
25th May, 2018, 02:48 AM
it can read/write by Stool/Mtool via Denso connection without opening the cluster
I think some tool with denso software can also do it...
This is via OBD2? A computer obd2 adapter and this software? Not familiar with the software, sorry.
llanesluna
25th May, 2018, 02:57 AM
Ok, I have made my research and Im confused, what adapter should I buy: ELS27 or ELM27?
digimile
25th May, 2018, 11:38 AM
hi
it wont obd open cluster and power up and denso points...
thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.