PDA

View Full Version : read MC68HC12D60 with UPA usb



adam28
15th November, 2009, 11:11 AM
Hello people,

Im having bit of trouble reading the MC68HC12D60 with UPA usb. I connect to the relavent pins Vss, BKGD,RESET and Vdd.

This is what i get after trying to read .


Cheers for any help lads

PremierD
15th November, 2009, 11:35 AM
What are you trying to read mate.....?

UPA use VSS and VDD ....ETL use VSSx and VDDx......

adam28
15th November, 2009, 01:31 PM
its a renault airbag module mate, need to clear it .


Cheers

Jose19
15th November, 2009, 04:18 PM
its a renault airbag module mate, need to clear it .


Cheers
Hi Friend

Check your pm

BR

Jose

adam28
15th November, 2009, 05:15 PM
Cheers,but still getting same problem...

Ezber_Bittar
15th November, 2009, 05:31 PM
What's the MCU mask?

adam28
15th November, 2009, 05:58 PM
1L28M..........

Regards

denis500
16th November, 2009, 12:06 AM
upa-usb reads without a problem that Motorola

PremierD
16th November, 2009, 12:17 AM
1L28M..........

Regards

Did you try using vddx and vssx... instead of vdd and vss mate...?

adam28
16th November, 2009, 08:04 AM
Did you try using vddx and vssx... instead of vdd and vss mate...?


Will try later and let you know.

Have you had it not read on Vdd vss . then sucseeded with vddx and vssx before?
Cheers

squirrelbandy
16th November, 2009, 10:09 AM
hi , ive read a few of these lately and found some will read incircuit and some wont , i have ETL and UPA just incase .

PremierD
16th November, 2009, 10:55 AM
Will try later and let you know.

Have you had it not read on Vdd vss . then sucseeded with vddx and vssx before?
Cheers
Yep sure have mate....

adam28
17th November, 2009, 05:49 PM
Yep sure have mate....

Thanks mate that worked!

Cleared crash data and now the ~~~~ing thing wont write to the chip! For fcuk sakes!!! What the ~~~~!:banghead:

Ok sorted now selected wrong mcu on programming. What a dry lunch i turned out to be!!! DOH!!!

Cheers

martin292009
6th May, 2010, 12:04 AM
raises all the pins and read