Help for reprogramming remot control toyota yaris

[elhouda]

HI
how to syncro remotes toyota yaris 2011 ?
The car does not respond to the remote control when i try to arming or disarming it.
but the central lock works with the key
the alarm model cobra 4160

[shooting]

HI
how to syncro remotes toyota yaris 2011 ?
The car does not respond to the remote control when i try to arming or disarming it.
but the central lock works with the key
the alarm model cobra 4160

Probably similar to this:


Ignition switch in “OFF” position and driver’s door open. This procedure must be completed within two minutes:
1. Switch the ignition on and then off
2. Close and open the driver’s door twice - door ends up in the open position
3. Switch the ignition on and then off
4. Close and open the driver’s door twice - door ends up in the open position
5. Close the driver’s door
6. Lock using the door lock button on the door
7. Switch the ignition on and then off
8. Unlock using the door lock button on the door - the locks will cycle
9. Remove key from ignition, briefly press and release both lock and unlock buttons on the remote
10. Press and release lock button on the remote

[elhouda]

Hello my friend.
I tried this solution but without a result is there another solutio​n, thanks in advance.

[super jumbe]

Hello my friend.
I tried this solution but without a result is there another solutio​n, thanks in advance.

Which country? never saw that key and remote in uk.

[lpf01]

Its not a factory remote but an aftermarket alarm remote, check the alarm's user manual for remote programming.
You will need the override code for the alarm too.

[sleepyrz]

seriously this is a google search

learn how to do one of these

https://www.google.com/search?q=alarm+model+cobra+4160&oq=alarm+model+cobra+4160&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8

[diephieu2023]

Please try it:

1. INSERT and REMOVE the key from the ignition key cylinder twice within 5 seconds.

2. CLOSE and OPEN the drivers door twice within 40 seconds.

3. INSERT the key into the ignition and remove it, do not turn.

4. CLOSE and OPEN the drivers door twice within 40 seconds.

5. INSERT the key into the ignition.

6. CLOSE the door.

7. Turn the ignition switch from LOCK to ON and back to LOCK at about 1 second intervals
to select the desired mode :

NOTE : 1 time for ADD.
NOTE : 2 times for REWRITE.
NOTE : 3 times for CONFIRMATION.
NOTE : 5 times for PROHIBITION.

8. Remove the key from the ignition.