View Full Version : Passat B6 BMP stage1, dpf and egr off needed
Jashmine1983
27th May, 2018, 06:36 AM
Hi to all!
Please help with a stage 1, good dpf and egr off on the file atachet.
Car is passat B6 engine BMP, 2.0, 140 HP, year 2005.
Thanks!
Ignasvw
27th May, 2018, 09:51 AM
your mod file
Jashmine1983
27th May, 2018, 11:41 AM
your mod file
Thanks!
Your file has exhaust presure sensor, lambda and temp sensor DTC off?
I have a problem with a temp sensor......
The file has EGR and DPF off?
Ignasvw
27th May, 2018, 11:43 AM
Thanks!
Your file has exhaust presure sensor, lambda and temp sensor DTC off?
I have a problem with a temp sensor......
The file has EGR and DPF off?
Lamda on, only dpf sensors off
Sent from my iPhone using Tapatalk
Jashmine1983
27th May, 2018, 02:13 PM
Lamda on, only dpf sensors off
Sent from my iPhone using Tapatalk
Can u make lambda off also?
maajkii
27th May, 2018, 02:22 PM
lol lambda off? how you wait to drive without afr monitoring
Jashmine1983
28th May, 2018, 04:49 AM
lol lambda off? how you wait to drive without afr monitoring
I've swaped ECU because I got watter in mine...I've cloned It in another EDC16U34 (by BDM) but with this ECU I have seensors ERROR. The ECU motherboard seems the same but is from a BKD engine that has no DPF.That is why I need and lambda error off. Can be done or I need the same ecu code from mine?
Not all EDC16U34 are interchangeable?
jurebv
28th May, 2018, 07:37 AM
of course it is possible to lambda off and use MAP/MAF smoke AFR monitoring - you can see switch in your file adress 1D6F19 - Auswahl Rauchbegrenzung über Lambda (0) oder Menge (1) (Selection of smoke limitation via lambda (0) or quantity (1)) which is set to smoke MAF/MAP(which is determined by another switch after) by default in your ecu so all you need is DTC off....post here your DTC code and I will remove it
Jashmine1983
3rd June, 2018, 07:08 AM
Thanks to all!
Problem solved with another ECU from BMP engin e with DPF....clonned mine with BDM
I've atached BDM files....from BMP and BKD if somebody will need
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.