Audi TT 2003 cluster and ecu syncro on bench

[comizelu]

Hi guys.
Got this 2003 tt and need to make since on bench like pin cs mac vin and transponder to make it start.
On the ecu there is a 95040 ecu and should contain the immo data.
On the cluster there is a MC912 that should contain the immo data.
For the eeprom is not a problem to read it..
What about the cluster ?
What's the Pinout for read the mc912?
I will use vvdi prof for reading..

Thank you
https://uploads.tapatalk-cdn.com/20180528/637c312fbca31123b9d5cbd73e68b0e1.jpghttps://uploads.tapatalk-cdn.com/20180528/3cdbf6b2327afe1d65f650ddb173fe1e.jpg

Inviato dal mio HTC 10 evo utilizzando Tapatalk

[drugowaz]

Take multimeter and ring the cirquit

[comizelu]

these are the files..can someone take a look if are alright?
give me pin as well...
will the car start with these files?i have to add a transponder with tango..i just need the dash file right??
thank you

[haiz0708]

hi comizelu, can you send the file again?
I lost the data please help

and have any solution for this?

[leaserhu]

Hello
dash pin 8147
and adapt immo2 procedure like vcds wiki

[rob h]

You could make key, and ecu immo off.
Use emulator if needed.

8L0 906 018 M
8L0906018M 0261206797 me7.5
25040 eeprom 95040

[alclot]

Hi mate,
I have similar situation. How do you wiring units on bench to do it?
Thanks in advance ;)