Log in

View Full Version : Clone cluster - Mercedes vito year 2001


alclot
28th May, 2018, 05:51 PM
Hi mates,
It is my firts time with this cluster. It is fualty and I bought donor one to clone. Can anyone help how to clone it and steps if I need to open it?
thanks in advance ;)
brend
28th May, 2018, 05:53 PM
If both dash nr/sw same just copy/paste eep , thats all.
alclot
28th May, 2018, 06:23 PM
Is it easy read e2prom or I need any step to open it carefully?
Thanks for your answer ;)
levisdj
29th May, 2018, 07:32 AM
NO eep in that dash, all data is stored in motorola MCU ... to open dash you don't have to remove needles as they come off with the motors, the only thing that you have to be aware is the LCD display it's glued to the board and any mistake will remove it easily from the board...but to swap dash there is no need to open it up, it has no immo data inside, if you want to adjust mileage, just go with digi wigi and all will be ok.Cheers
alclot
29th May, 2018, 07:42 AM
Hi mate. Can I adjust milenage with pinout obd?
Thanks ;)
levisdj
29th May, 2018, 07:46 AM
Use ST19 from digiprog3
brend
29th May, 2018, 11:19 AM
With digiprog original/clon both done 100%.


Hi mate. Can I adjust milenage with pinout obd?
Thanks ;)
brend
29th May, 2018, 11:21 AM
W638 have 2 version.
1.908AZ60 (MCU)
2.93S46 (EEP)



NO eep in that dash, all data is stored in motorola MCU ... to open dash you don't have to remove needles as they come off with the motors, the only thing that you have to be aware is the LCD display it's glued to the board and any mistake will remove it easily from the board...but to swap dash there is no need to open it up, it has no immo data inside, if you want to adjust mileage, just go with digi wigi and all will be ok.Cheers