PDA

View Full Version : PIN readout


7thGuest
29th May, 2018, 03:30 PM
Hey there,

can anyone tell me what I need to read out my pin code for the IMMO from the EDC16U31 (Audi A4 - 2006) ECU or the combi instrument?

I only have VCDS pro USB-cable (not a clone - original).

I don't want to change anything (mileage or so) - just read my PIN.

(Maybe it's possible to use my VCDS-cable and some other software?)

THANKS
castin
29th May, 2018, 03:37 PM
not possible VCDS. Try simple kkl and vag eeprom programmer.
7thGuest
29th May, 2018, 03:51 PM
Try simple kkl and vag eeprom programmer.

I have VAG eeprom programmer.
But which cable should I use? (I have one with "AutoDia K409") - but this does not seem to work.
Sorry - I'm totally unexperienced...
rafal
29th May, 2018, 03:58 PM
Open ecu and read by bdm or desolder eeprom and read by programmer. Post dump.
7thGuest
29th May, 2018, 04:05 PM
Open ecu and read by bdm or desolder eeprom and read by programmer. Post dump.

Want to keep the effort as less as possible.
I have no BDM equipment and don't want to remove the ECU.
brend
29th May, 2018, 10:57 PM
If you dont want to do nothing, bay same spetsial tool for pin reading by obd2 away like super Vag or samething like this.

VCDS no have sulution like read pin/login.Thats all.So.......


Want to keep the effort as less as possible.
I have no BDM equipment and don't want to remove the ECU.