PDA

View Full Version : Audi TT mileage correction



spitt
30th May, 2018, 11:13 AM
Hello. Can anyone help me. I tried to change the mileage with Tachosofts mileage calculator and it just stays at 999999. Here is the HC12 dump. I need it at 152343 miles. Also a virgin dump with 0miles would be nice. Thank you

SxL'.xll
30th May, 2018, 11:32 AM
you have 80 000 ?

SxL'.xll
30th May, 2018, 11:34 AM
TRY AND REPORT

spitt
30th May, 2018, 11:41 AM
<p>
Nope. Still 999999</p>
<p>
0km =<br />
String #1 = FFFFFFFF<br />
String #2 = 00000000<br />
String #3 = 5720</p>
<p>
This is what I get for 0km that doesn&#39;t work</p>
<p>
I see your cks is 84 64 but it still doesn&#39;t work</p>

nikz
30th May, 2018, 11:43 AM
Where is the original dump ??

spitt
30th May, 2018, 11:46 AM
Overwritten with this version by mistake, save instead of save as. I can use another one though, the car has immo off. I need the newer version of software. He had 2003 cluster and bought a 2001 one. The fuel gauge was reversed.
8n2920980A - the version that shows the correct fuel level

SxL'.xll
30th May, 2018, 11:58 AM
A 8n2920980A WITH 0KM TEST AND REPORT

spitt
30th May, 2018, 12:16 PM
Still no go. I am sending the car away and will keep trying on the other tt clusters I have. Maybe it's a cluster issue.

spitt
30th May, 2018, 12:36 PM
Here is a dump that works. The problem is that it is a km/h dump and the cluster has mi/h foils.

SxL'.xll
30th May, 2018, 12:40 PM
just with vagcom switch to miles

spitt
17th June, 2018, 05:21 PM
Hello again. I managed to find a 8n2920980a dump that works. It shows 177240 miles. Can anyone change it to 152800 miles / 244480 km ? Thank you

letalcrudo
18th June, 2018, 05:49 PM
Hello again. I managed to find a 8n2920980a dump that works. It shows 177240 miles. Can anyone change it to 152800 miles / 244480 km ? Thank you

Try this and report

spitt
18th June, 2018, 09:25 PM
I can't believe it. It worked!! Thank you so much. It shows 151945 miles. About 1000 off. Is it possible to bring it closer to 152800? Or change the mileage to 5 or 10 miles? Then I could adjust it exactly with VCDS.
Even if you can't thank you so much. I was beginning to loose hope.

nikz
18th June, 2018, 09:47 PM
test......................

spitt
19th June, 2018, 07:23 AM
Hello. Yes it worked. 152800 to the mile. Thank you. Can you put a file with less than 50 miles so I can have in case I have another cluster like this that needs mileage correction?

nikz
19th June, 2018, 07:45 AM
Hello. Yes it worked. 152800 to the mile. Thank you. Can you put a file with less than 50 miles so I can have in case I have another cluster like this that needs mileage correction?
less than 50 miles

spitt
24th June, 2018, 06:18 PM
Sorry, the reply went to page 2 and I didn't notice. I will test and report but I am sure it will work, just like the last file. Thank you

OoZz
18th February, 2019, 08:48 PM
Sorry to dig an old thread.
What tool are you using to read and write the .bin files?

I am trying with Vag K-Can Commander 3.6, I can read the files but it doesn't seem to write.