help pls do some one have clear dump file ford fIESTA 2016 us spc

[Hussie]

ford fIESTA 2016
vin: 3FADP4BJ7GM139100
US SPC
MODUL:FOMOCO D2BT-14B321-BF
infineon xc2361
clear dump file plz
i lose the file

[wti]

return the result .
return the result .

[Hussie]

it is not working

[virusmind]

of course it is not gonna work - vin is stored in the dump. you need to use ids to restore asbuilt data in rcm or use forscan to manually enter data for your vin.




737-01-01
3346
4144
508E



737-01-02
3442
4A37
477F



737-01-03
4D31
3339
315D



737-01-04
3030
A3




737-02-01
C768
CF30
107F



737-02-02
0C77
00C5




737-03-01
0F51





737-04-01
0043





737-05-01
4845
D1




737-06-01
0E5D
B0

[Hussie]

I dont know how to do it

[Hussie]

And I Dont have this softwear I wil ASK Some one to help me with iT Thank You

[Hussie]

But after wirth the file iT is olso not Reading on carprog read error

[Hussie]

Pls someone help me

[virusmind]

just write provided dump into your module and do necessary programming on the car with IDS or Forscan. make sure you bolt rcm to chassis otherwise module wont communicate

[Hussie]

I did write the file to the modul. But when i read fault memory on carprog it say read rcm error don’t show vin or module nr

[virusmind]

are u tryin to read module on the bench or in the car??

[Hussie]

Yes on table not on the car

[Hussie]

This why I’m thinking this dump is not for this modul normally you can read it

[repairmymodule]

Can you read original file? If you program just 32kb eeprom data portion of Infineon MCU, you will get U3000 module fault code.

If your original data is corrupt, you will need complete flash read from another module to avoid this code.

Carprog cannot read or program complete flash, only data portion...

[Hussie]

What I did I opened carprog- than airbag than ford than infineon xc2361 I did read the memory than I send the file to carprog online crash clear after I write it than it is not working.

[repairmymodule]

Oh ok.

Their solution for ford Infineon is 100%.
Post your original crash file and the clear file you got from codecard so we can look and make sure files are ok

It's after you program the file you get no communication? Make sure the airbag module is bolted firmly to the chassis. It's gets ground from the chassis.

[Hussie]

But When I read it on table is not working olso if I but the crash back

[Hussie]

this are the 2 files
533660
533661

[repairmymodule]

They clear a very strange way, to try to hide where crash data is...

Write this file and you should have communication, clear errors and you will have a clear module.

[Hussie]

Thank you my friend I wil try and let you know