PDA

View Full Version : Simos pcr2.1 writing problem



Mohammedananew
8th June, 2018, 12:20 AM
Hello to all i have a problem on ecu pcr2.1 , need to do egr off , this my first time to work with pcr2.1 , I connect kess v2 and read ecu id kess give me the ecu is unlocked , i ask my friend because this my first time on pcr2.1 he told me you need to do manuly unlock to be sure the ecu is 100% unlocked .
i do manual unlock and see that ecu didn’t open before (factory condition) . At this moment told my self impossible this ecu is unlocked from factory.
Finally: the ecu writing modified file at 100% give ecu writing error .
when writing ori file , no problem writing full flash file without any problem.
need to know where is my problem.
Thanks

dominik.m
8th June, 2018, 12:31 AM
Are You have another tool? Like FGTech?

Mohammedananew
8th June, 2018, 01:06 AM
Are You have another tool? Like FGTech?
Yes , i will tring using galletto, on 100% error writing ecu same as kess

dominik.m
8th June, 2018, 01:15 AM
I had similar problem some time ago.
I used VCP and I write file FRF. Next- I unlock ECU. I read ori file , I did over again , later writing did not make up problem.

DeSSeD
8th June, 2018, 01:18 AM
i think probleme in your eprom its locked

dominik.m
8th June, 2018, 01:24 AM
I think, if ECU does not be unlock , writing ori file is not possible!

Mohammedananew
8th June, 2018, 01:34 AM
i think probleme in your eprom its locked
Some one told me to restore eeprom ori backup because the ecu is already unlocked, if you repat unlock on unlock the ecu becomes locked.
is this real ?

Mohammedananew
8th June, 2018, 01:35 AM
I think, if ECU does not be unlock , writing ori file is not possible!
The ori backup can write in locked and unlocked mode

docbilandro
8th June, 2018, 01:35 AM
hello
for pcr2.1
you have to read flash and eeprom
eeprom : unlock it
flash : remove what you want to remove - with winols or swiftec - for ex : dpf egr off
after you write
the verry good tool to write on pcr 2.1 is galetto
good luck

Mohammedananew
8th June, 2018, 01:43 AM
hello
for pcr2.1
you have to read flash and eeprom
eeprom : unlock it
flash : remove what you want to remove - with winols or swiftec - for ex : dpf egr off
after you write
the verry good tool to write on pcr 2.1 is galetto
good luck
I do on galletto same result.
my question is , first ecu id check give me the ecu unlock and i do unlock on already unlock is this mistake??

dominik.m
8th June, 2018, 01:46 AM
To be maybe so. You unlocked already unlocked ECU.

Mohammedananew
8th June, 2018, 01:48 AM
To be maybe so. You unlocked already unlocked ECU.
Unlocked already unlock = the ecu comeback locked ?

Inquizit0r
8th June, 2018, 04:32 AM
Unlocked already unlock = the ecu comeback locked ?

Yes. When you unlock unlocked ECU it became locked again. Write original EEPROM and write modified flash.

MVVL
8th June, 2018, 06:30 AM
Hey. When identifying KESS what do you write in this window? Look at the screen.