PDA

View Full Version : pinout ktag mercedes 204 crd.11 OM646 EVO or dcm3.2



alcorte
8th June, 2018, 11:25 AM
I have than read and write this ecu: A 646 150 15 72 / CRD.11 OM646 EVO.

I have a doubt with the pinout. I have seen an image in this forum many times, but it does not convince me. I think it's for another machine. Not for ktag.


I want to read it with ktag, I have the supposed adapter for the ktag. I have made an outline of the adapter's own pinout, but I do not know if it is correct. My adapter have two pins are connected to Pin 6 (GND).


Someone who has already read and written it with this adapter, can I verify it?

kamsky
8th June, 2018, 12:33 PM
Maybe this will help you. Looks correct.

alcorte
8th June, 2018, 07:49 PM
This I've seen this picture, but those connections do not know what machine they are, but I do not think it's for ktag , with ktag you have to make only one bridge this picture shows two.

alcorte
10th June, 2018, 08:08 PM
someone can see the pinout this adapter. This adapter is inluide in ktag clone and original. Thanks.

blackwolf76
10th June, 2018, 11:22 PM
i have used the adapter on clone ktag, only insert on bdm port... no soldering, press only hand.:tears_of_joy:

if you won, send me on pm your phone number and i send video.

alcorte
11th June, 2018, 08:53 AM
but I would like if someone who has done it, can look at the pinout, to compare it with mine, that I have uploaded in post 1.

alcorte
11th June, 2018, 09:42 AM
The pinout than I need is:

The adapter 14AM00T02M or Adapter 14AS00T04S