Not sure if anyone is willing to help me

[BRMTDI]

Not sure if anyone is willing to help me, I do not own auto hex yet.....have to save up the cash for it, looks like a amazing tool.

I have a used DME MSV70 I pulled its ISN, Had someone from forum assist in changing the VIN to match my current CAS.

Wrote DME ISN to CAS3+,

So I included un matched files, and matched just hoping maybe someone can just maybe can go over my work, tell me if it looks right using a much better tool then what I have, just a tuff Job has me stuck...

When I write fixed eprom to CAS I dont get response from car unless I reflash the Flash side of the CAS via ISTAP Repair, not to over complicate it, just what I have been going through...

Hoping someone can verify my files look good and ISN seems to be correct and written correct.

Again if this is not the place for it I understand, just was running out of ideas and I know autohex is the top dog with these things, just trying to get over this hump, with this Job, until I can afford auto hex.

[GameTheoryOptimal]

you are obviously in the wrong thread... I would recommend for you to open your own thread, or we will pollute this one.
but to answer your question, ISN seems ok, but VIN are a mismatch.
4bytes ISN in original CAS: C5 9D
4bytes ISN in modified CAS: 2F B0
VIN: WBANF73557CU26535

4bytes ISN in DME: 2F B0
VIN: WBANF73567CU26535

you can try this file for DME, but for CAS, not sure what you are doing wrong. can we see flash? or original DME flash file? (as I said, start an other thread)
also, it is a 5 minutes job with the proper tool... just saying.

[BRMTDI]

you are obviously in the wrong thread... I would recommend for you to open your own thread, or we will pollute this one.
but to answer your question, ISN seems ok, but VIN are a mismatch.
4bytes ISN in original CAS: C5 9D
4bytes ISN in modified CAS: 2F B0
VIN: WBANF73557CU26535

4bytes ISN in DME: 2F B0
VIN: WBANF73567CU26535

you can try this file for DME, but for CAS, not sure what you are doing wrong. can we see flash? or original DME flash file? (as I said, start an other thread)
also, it is a 5 minutes job with the proper tool... just saying.


I only asked for help here out of pure desperation, I made my own thread and DME Fix I received was the one in that file which the VIN was written wrong, I am not sure if I would catched that...and thank you very much for seeing that. Just I know who ever has autohex the tool is the best there is,

AutoHex is on my list of tools to get but trying to do normal key Jobs to be able to afford it, but just in a hole I am trying to get out of right now.

I did not bother with the CAS Flash Dump did not think it was important, Original DME of the vehicle does not exist, someone made mess and installed a CAS2 Module in a CAS3 car and installed a MSV70 2WD DME on a 4WD E60,

I did not know all of this going into the Job, so again dont want to pollute anything, and just wanted to say thank you for offering the help, I can PM you CAS Flash if thats ok with you, or post when I get it, but dont want to make a mess of the forum.

[BRMTDI]

I wrote your FLASH for DME with FIXED VIN.

Thank You again,

Here is my current CAS3+ EPROM
Also the current FLASH Written to it to CAS3+, think maybe something is up with the FLASH maybe.

I also Used VVDI to write ISN to CAS3+ current EPROM, because it came up as FFFF, but have a feeling tool is full of bugs, CAS ID then comes up with 15151515 for the ID, after writen fixed EPROM was Flashd.

Again I appreciate the help, I was kind of running out of Idea's.

[PremierD]

Moved to proper place......:)