PDA

View Full Version : Denso RF7X reading on the bench



ivanmihov
10th June, 2018, 04:41 PM
Hi DK members,it's my first time dealing with mazda 6 with Denso ecu RF7X.
i can read and write this with no problems via OBD,but to make sure that i can fix this ecu if it gets bricked some day i bought spare ecu just to train with it.So my question is how can i read it on the bench.i bought two adapters for reading and writing adaptors 14AM00T11M and 14AM00T09M (bought the whole bdm set from ebay ) tools that i have are ktag,kess, and galleto v54
i know that it can be done with ktag soldering wires from ribbon cable,but i hope it can be done with bdm adapters

when i connect everything according ktag here is what i have

Samsara
10th June, 2018, 09:13 PM
Hello.

galleto v54
Try it, it use 10 wires instead of 9 wires for KTag.

kospoz
10th June, 2018, 09:19 PM
ktag 7.020 can read it v54 no.

ivanmihov
11th June, 2018, 09:36 AM
My ktag is v 6.070 but still it should connect,maybe my connection is not right

kospoz
11th June, 2018, 10:22 AM
My ktag is v 6.070 but still it should connect,maybe my connection is not right
i have 6.070 and cannot connect it but with 7.020 no problem

ivanmihov
11th June, 2018, 10:36 AM
I wanted to buy 7.020 anyway so now is the time