Suzuki V-storm 1000 mileage

[szkeptmen]

Hi,
Need a little help with a photo, if anybody has it...
Bike is Suzuki V-storm 1000 , year 2017.
The eeprom is under the big LCD, I don't wanna to desolder it...

I'm looking for a photo from the pcb with soldering points for programming :)

THX+REP

[azepako]

i think there is an eprom under lcd 93c66
u need to remove lcd for reading

[szkeptmen]

Yes I know.
The question was NOT this...

[szkeptmen]

Attached a photo from the pcb...

[frankrayk]

Hi,
Need a little help with a photo, if anybody has it...
Bike is Suzuki V-storm 1000 , year 2017.
The eeprom is under the big LCD, I don't wanna to desolder it...

I'm looking for a photo from the pcb with soldering points for programming :)

THX+REP

Here it is, but be very careful.534794

[szkeptmen]

Hi,

It's great ! THX again.

Did you try to program it from here ?
I think, the safe way is :
- short xtal
- lift the processor's legs.

I hope, it's enough...

[frankrayk]

Hi,

It's great ! THX again.

Did you try to program it from here ?
I think, the safe way is :
- short xtal
- lift the processor's legs.

I hope, it's enough...

Only the first one I removed the display, the others I changed were exactly the same as the photo, I use the original UPA with 3.3V, you do not have to lift a pin or bridge.
But it is very delicate to solder the wires in the pins of the processor.
It is at your own risk.

[szkeptmen]

Works fine without lifting any pins...