2014 Corolla help please

[Triniguy]

hi mates

i have a problem with said corolla MSOP8 C66

since i changed mileage from 69xxxkm to 30000km trip1 sticking at 0.4 and trip2 going u to 0.9 and then back to.
And mileage not moving, staying on 30007km

Can anybody help me please. Both files are attached

Kindly regards

[skilion290]

Just post the original file that you first read will edit for you and you write back


Sent from my iPhone using Tapatalk

[hexguru]

in your original file is 169999 km, in your edited file is 30009 km, all should work, may be bad soldering? try this 30000km

[Triniguy]

Thank you. Will try it and report. And you right 169xxx was correct.
Thank you

[Triniguy]

both in the zip folder mate

[Triniguy]

both in the zip folder mate


Just post the original file that you first read will edit for you and you write back


Sent from my iPhone using Tapatalk

[compucriss]

modifica solo la linea y antes de bajarlo y guardarlo coloca los trip en 0

[Johnner]

This is an English speaking forum mate...please remember that ;)

[ascrap2003]

modifica solo la linea y antes de bajarlo y guardarlo coloca los trip en 0
Solamente en ingles porfa! English only please

[ascrap2003]

Did you remove eeprom from board? I belive new corolla you need to remove eeprom!

[Triniguy]

Yes I did. MSOP8 C66

[letalcrudo]

Yes I did. MSOP8 C66
did you fix it?

otherwise download this file and try. please report experience

[Triniguy]

did you fix it?

otherwise download this file and try. please report experienceThank you. I will get back the car on the 26th and will report


Sent from my HUAWEI RIO-L01 using Tapatalk

[ascrap2003]

Be carefull I gave ran into a few of these toyota that have components right next to eeprom, if youu have bad eyes like me, you can easily dislodge a cap or resistor

[Triniguy]

Be carefull I gave ran into a few of these toyota that have components right next to eeprom, if youu have bad eyes like me, you can easily dislodge a cap or resistorI actually really did but got a spare one from a brain and fixed it back. Before the panel was dead.

Sent from my HUAWEI RIO-L01 using Tapatalk

[Triniguy]

I actually really did but got a spare one from a brain and fixed it back. Before the panel was dead.

Sent from my HUAWEI RIO-L01 using TapatalkI guess that's a part of learning, lol. Happen ones on a Elantra MSOP8 before so I extra careful now. But still get cought again

Sent from my HUAWEI RIO-L01 using Tapatalk

[ledong]

Dump error u need original dump or other dump good for solve.

[Triniguy]

Dump error u need original dump or other dump good for solve.In my first post I posted original 169XXX and changed dump 30XXX

Sent from my HUAWEI RIO-L01 using Tapatalk

[Triniguy]

In my first post I posted original 169XXX and changed dump 30XXX

Sent from my HUAWEI RIO-L01 using TapatalkI getting the car back on the 26th and will try to repair.

Sent from my HUAWEI RIO-L01 using Tapatalk

[clusters]

All the files posted in this thread SEEM to be OK. Check your soldering or try another dump.

Search function works, and there are a few dumps here.

[Triniguy]

All the files posted in this thread SEEM to be OK. Check your soldering or try another dump.

Search function works, and there are a few dumps here.I will, thanks

Sent from my HUAWEI RIO-L01 using Tapatalk

[Triniguy]

Thanks again to everyone.
PIN was soldered bad. Working fine now
Thanks