VOLVO cem configuration software

[ecumix]

Hi i need to know if someone have software to change configuration cem in volvo car?

[brend]

In your dreams............

[ecumix]

Maybe some editor ?

[voltechcar]

I have guy which edit configuration in volvo cem but write more info about car

[brend]

Nothing like thats for volvo.Only same little low sulution from VIDA, thats all.


Maybe some editor ?

[ecumix]

Thank you guys for info i ask becouse lot of people change config to UK to EU so i need to know what is software can do that .

[brend]

Which modul exactly you mean?


Thank you guys for info i ask becouse lot of people change config to UK to EU so i need to know what is software can do that .

[Tomanio]

I ve got something like that...

[wormland]

Yes possible :)

[brend]

Possible what?

Yes possible :)

[ecumix]

Possible to change configuration in cem ... i am right "Tomanio"?

[urcarpc]

https://d5t5.com/article/vdash-volvo-diagnostic

on here it says you can change configs with vdash using vida tool

[MartiLer]

You can change the configuration. you need to read the dump CEM and change the data with your hands.

[Mazylis]

Hi, which program can read car cem flash?

[giegaand1]

Hi, which program can read car cem flash?
what car? what kind of CEM?

[Mazylis]

what car? what kind of CEM?
Car volvo v50 2006 sorry im write wrong, i want to read dash panel flash.

[giegaand1]

then you are in the wrong section, this is IMMO section

[ecumix]

I HAVE CHANGE COFIGURATION ALL CEM 2007 TO 2016 IF SOMEONE HAVE HELP JUST WRITE TO PRIV

[mariom598]

I HAVE CHANGE COFIGURATION ALL CEM 2007 TO 2016 IF SOMEONE HAVE HELP JUST WRITE TO PRIV

Hi,sent PM...

[yarikne]

I can help with cfg change.
Now I have info abot SPA Volvo 2015-2022. You can read config with SMOK obd and Jtag.
Old Volvo too.

[bmwspec]

I can help with cfg change.
Now I have info abot SPA Volvo 2015-2022. You can read config with SMOK obd and Jtag.
Old Volvo too.
U can read this spc with any programmer which supports this spc, find cfg area, but u dont know which byte corresponds for which option + need checksum after edition, so what u know exactly , may be u explain here

[yarikne]

U can read this spc with any programmer which supports this spc, find cfg area, but u dont know which byte corresponds for which option + need checksum after edition, so what u know exactly , may be u explain here

Sorry for my English, here before.


I can't share the checksum information because it's not my experience.

Smok can read and write the configuration area. He calculates a checksum for this area.
Most of the configuration can be changed there. But unfortunately not all. I was able to understand which bytes are responsible for what.
I can, for a small fee, change your dumps.
Also, I can remotely flash your cars. but you need an official DICE (or with a changed number).

[lupu_sandu]

I can confirg that yarikne can change configuration on SPA.
Great guy and very helpfull

[gljuk]

Is it also possible to switch off steering wheel lock off for spa platform?

[yarikne]

Is it also possible to switch off steering wheel lock off for spa platform?

Yes. I can help. Private message please.

[Amgo79]

HI! I need to synchronize the CEM and ECU of the Volvo XC90 2018.

[MartiLer]

read the dump from the ECM

[kalinin2018]

HI! I need to synchronize the CEM and ECU of the Volvo XC90 2018.

i can do it! see PM..
I can synchronize CEM and ECM for all P2, P3, SPA platform!

[aceton]

https://www.youtube.com/watch?v=VUX9kiDkyCY
Does it work ?

[duzi]

spa xc90.. where CEM it located?

[gljuk]

On the driver side up-left from pedals. You have to remove plastic cover first.