Carprog Remove protection

[MAXIMUS1000]

Hi everyone

I have this tool(hardware) CARPROG,can anyone good at this remove the protection to open all modules???
Is this possible?
Lets try and see if anyone can do it with the help of all...
Must be a way of open all of this modules......

I have all details if anyone needs it....

Cheers

[jogi]

hi,
As far as I know each device has a unique serial nr. It can mean that the pc software checks it and enables or disables the future according to the nr. It would mean pc software is the place we have to start looking for the solution. Am I right ?

regards
jogi

[MAXIMUS1000]

hi,
As far as I know each device has a unique serial nr. It can mean that the pc software checks it and enables or disables the future according to the nr. It would mean pc software is the place we have to start looking for the solution. Am I right ?

regards
jogi
Hi

YOU ARE CORRECT....they have a serial number....

Cheers

[busaman]

now that would be something if it is possible.

[kptuning]

Do this interface read and wirte flash of psg16 opel/saab ecu?

[jogi]

Do this interface read and wirte flash of psg16 opel/saab ecu?

NO Idea man. Check their web.
ht*p://w*w.codecard.lt/carprog/software/opel-psg16-diesel-pump-by-obdii-read/change-mileage-read-pin-reset-ecu-/prod_375.html
As for the main thread. My pc programming skills are advanced enough to write a reasonable pc software. I'm also able to program some microcontrollers, projects I did are quite complicated. As for r.e. in particular software unpacking, can't help :(.

regards

[tordu]

hi if you have carprog can you help me please !

Thanks

http://www.digital-kaos.co.uk/forums/f68/dash-m-maretti-vito-cdi-write-data-58865/?highlight=carprog

[designer79]

to:MAXIMUS1000

help me scan protokol write dump
to Merc Vito via K-line(OBDII).

[teleser]

this program cracked where??

[Persia]

you can edit dumped file with car prog

[glk96000]

Yes

93Cxx series : 93C06, 93C06 8bit, 93C46, 93C46 8bit, 93S46, 93CS46, 93C56, 93C56 8bit, 93S56, 93CS56, 93C66, 93C66 8bit, 93S66, 93CS66, 93C86, 93C86 8bit, 93S86, 93CS86;
24Cxx series: 24C00, 24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C128
95xxx series: 95010, 95020, 95040, 95080, 95P08, 95160, 95320

[ecux]

i had a look at it,what does it do differently when its enabled ? I saw it lists n/a next to most of the devices, but turning that off was straightforward enough.

Not so easy without hardware to verify.

[busaman]

i have the hardware i willl test for you.

[fan60]

Hey, why You dont respect codecard guys products ? I know them verry well. Little bit shame on You, prices in codecard company are not so high

[cammy25]

Asking 350 euro for an emulator for yamaha is VERY HIGH!!!!
ofcourse we respect them ,but see this as a sport or hobby.

[busaman]

and 500euro for opel pin code.

[busaman]

and 500euro for opel login reader/reset.

not to count 300euro the vw login reader which i bought for rb dashes which it wont read.

[Tech_SOS]

Asking 350 euro for an emulator for yamaha is VERY HIGH!!!!
ofcourse we respect them ,but see this as a sport or hobby.

It's not a hobby for them or their customers. They make a living and so do we. They provide a good product and should be reimbursed for such.

[busaman]

It's not a hobby for them or their customers. They make a living and so do we. They provide a good product and should be reimbursed for such.


dont you think the same goes for every piece of software or tool that gets hacked,

[cartech]

hello!
I need just carprog to program new Infrared key of old renault megane/senic.
else, is there other easy method?
thanks a lot

[phatty123]

dont you think the same goes for every piece of software or tool that gets hacked,

its also not a hobby for mercedes, alldata, mitchell, microsoft, the music industry, the movie industry, and every other company that sells something

so im not saying yes yes go steal, but think about what your saying. I mean you ever buy chinese cloned hardware? thats stolen also, the didnt design it they stole the design and copied the software

[busaman]

its also not a hobby for mercedes, alldata, mitchell, microsoft, the music industry, the movie industry, and every other company that sells something

so im not saying yes yes go steal, but think about what your saying. I mean you ever buy chinese cloned hardware? thats stolen also, the didnt design it they stole the design and copied the software

exactly right and i would wager that almost every single computer user has or has had copied, cloned, or hacked hardware or software at some time or another. that runs into millions of people.

[jogi]

not to count 300euro the vw login reader which i bought for rb dashes which it wont read.[/QUOTE]

Man,

You don't have to buy it. You can write your own software or develop your own devices. The price is codecard decision.
The market shows if it's too high.
Imho - cracking is not always a question of money. It's the feeling ... paying for something I could get for free...

Breaking of carprog protection could mean the end of the codecard company. Is this what we want ?

regards

[phatty123]

people crack vagcom, its a great company they offer great support and the product is super cheap, BUT people still crack it and chinese still clone it

[cammy25]

BTW didnt you read the Topic discription?
Its not about Carprog company, its about how to crack it.
So pls go complain at the complain department of carprog.
Cracking carprog makes carprog stronger to develope a safer and better device.

[Jose19]

como puedo descargar el programasa
HI

Write English only!!!!

Jose

[Tech_SOS]

dont you think the same goes for every piece of software or tool that gets hacked,

I absolutely do. I wish there were no Chinese clones and no ripped off software. But, what am I going to do. I'm not here for the software, only for the automotive solutions.

I'm not judging, but, you asked. Chinese cloned tools and stolen software don't help me one bit.

[cammy25]

1 word..........hypocryt


Do you also ride on a white horse and wear a noble sword which kills only bad people? Or are you blind and carrying a balance?

[Rob1234]

dont you think the same goes for every piece of software or tool that gets hacked,

And don't mention where they got their database from cracking Manufacturer cars to get the software. Is that right for them and wrong for us who scrapping for living and are n't able to buy this software for 500 Euro!!!

If they are reasonable enough in their prices their software may be safe and not worth the agro!!!:viking:

:fight:

[OpenOBD]

Well, lots off talking here, but is the protection finally removed????

[koyot]

not yet .we wait

[florinyes]

I take it everyone has the cheap version of carprog? Anyone got the full version to share some thoughts?

Cheers

[mahmoud1]

not yet .we wait

[nauris]

I take it everyone has the cheap version of carprog? Anyone got the full version to share some thoughts?

Cheers
I have full Carprog, and think that it is very good tool! And never will help for peoples who want crack it!!
I do not want that Codecard be closed, like Rosfar !!!

[mr--x]

anyone new infos?

[erixlion]

is this carprog can re-write mileage of bmw750i?

[tas_daz]

for programmer is good the carprog?if they have not so expensive the programes it will be better
find anyone something for unlock carprog?

[impactops]

I had worked on this in the past with previous versions but could not continue without having the interface.For some people some extra functions worked, for a majority of the others the following error message was displayed

LIB File problem. Delete LIB file and make UPDATE -> INTERNET

I have implemented those changes on the newer version, so if you want to try it you can.If you run without the interface you can see the sub menus for the menus you click on.I will not be held responsible if it renders the interface useless, so i recommend you back up any eeproms internally that you need too.

[obdmaster]

I had worked on this in the past with previous versions but could not continue without having the interface.For some people some extra functions worked, for a majority of the others the following error message was displayed

LIB File problem. Delete LIB file and make UPDATE -> INTERNET

I have implemented those changes on the newer version, so if you want to try it you can.If you run without the interface you can see the sub menus for the menus you click on.I will not be held responsible if it renders the interface useless, so i recommend you back up any eeproms internally that you need too.

Got to say m8, this looks very promising i dont have an interface Yet. But with the look of this i will be buying one very soon.

thanks again m8:top:

[benz22]

file lib probleme
:)

[benz22]

file lib probleme

[umut66]

this probleeeem

[z786]

you didnt expect all the info 2 be in the exe lol
when u hav full soft, you also are given proper files for them 2 downlaod, in the LIBrary

[impactops]

you didnt expect all the info 2 be in the exe lol
when u hav full soft, you also are given proper files for them 2 downlaod, in the LIBrary

At this stage there is no evidence to suggest otherwise
The lib error occurs because the features that are now enabled in this version don't match the features that are enabled in the lib file depending on what extras you have paid for, thats why the error occurs.Because i do not have the interface i will never reach that part of the program that needs to be altered.When you pay for extra's the lib file downloaded in the update has had the extra's upgraded for the serial number you have given to them.I've heard that some people have tried to to experiment by altering the lib file to try & unlock it, but with this i exercise caution.There are routines within carprog that can lock the interface from ever working again.

The best way to tackle this & any other interface is to use a program like the one in the link below.If you can first test that carprog can be run on one machine and the device seen over the network then there is no limit as to what can be done.Teamviewer has been suggested but i would only use it as the last resort, cause it means that the machine that has the interface connected to it must have all the tools required to reverse it, that is difficult because of the variables that are involved

USB over Network Solutions - FabulaTech (http://www.usb-over-network.com/usbnet-solutions/remote.html)

[Stalker]

Thanks !

[michi84]

What kind of interfaces can be used for Opel PSG16 Soft read/write? Just original or are there any other (clone?) tools doing that?
regards & thx

[polat]

hi carprog v342
DOES (*) BREAK DOWN THE INSTRUMENT ?

[synchoboy]

Thanks :celticparty:

[raimis_codecard]

hi all
carprog software don`t stores any important information by itself
so software hacking is pointless
LIB file contains encrypted softwares for hardware only
encryption depends to sn#
all actions stored inside carprog + update server

so need to break both to unlock something

best regards
Raimis codecard team

[blackpirate]

its not imposible to reverse!
as hardware reversing gets strongler every day!

see ps3 getting reversed after 3 years!

problem its haveing the device!

P.S: nobody will buy the device just to reverse it! :P

my 2 cents.....

[Qrius]

I Know one man that could probably do it :laugh:

[mikeslocks]

Use a loader for changeg in ram or buy one and activate everything, crack hardware so you can fully activate your hardware. But unless if your selling hacked stuff i see no profit.

[rst10]

Thanks 4 the programm

[domel45]

You describe your transition from CarProg.
It is probably possible to do crack (maybe not so much crack as the existing clona CarProg), but you can not update online,you can use only with license file. Such situations have recently had purchased from the CarProg Partners been cloned (probably by another dishonest Partners), generally sn 09092 ..... .
After explaining the whole matter has been sent Hardware to codecard.lt the replacement - cost 100euro.
Here, information from support CarProg:




hi,
this device is registered to ceg..... and this man tryes to clone one or more our devices
so have turned off all full devices regarding ilegal activity

contact ceg..... to refund money
after you will get your money back send device to us
we will replace carprog hardware and activate all softwares you have buy
from us direct

our address:
Taikos 127C
KAUNAS
LITHUANIA
LT- 50472
UAB ATOMIS

regards Raimis
return this tool to Marcin MACHCINSKI
it must send this device to us
we can only replace hardware and sn# (this will cost 100euro + shipping)

regards Raimis

ps. Marcin MACHCINSKI - its new polish partner, and very good and reliable partner (in any event, satisfied with my work, I am working with him)

[nikasfuris]

thanks for prog

[sterling]

Codecard CARPROG is a good tool and the help is very good.

[frankyex]

thanks mate for it...

[domel45]

Carprog v3.75

http://hotfile.com/dl/65016534/fb75be3/Carprog_v3.75.rar.html
http://uploading.com/files/62ame727/Carprog%2Bv3.75.rar/

[Smac_a]

Hi all,

Do you guys have original carprog or clone? Where did you buy it?
Thanks,

Smac_a

[cqae]

carprog seems to be a great tool, but ny the time you buy all the packages its very expensive, but at least you can just buy what you need.
I do however find there website a little confusing & what the actual packages cover hard to understand.
I just bought the basic package & will buy what I need as I go along.
but definately seems to be a tool that they are working at making it do more than just the common stuff

[martij976]

carprog CAN'T do NEC mcu's!!! That's bad!
Seriously... i ask, would pay, but answer was (literally):"no not posible" (!)
How sad...:hmmmm2:

[scorpion1]

Thx for all information. I was loseing my mind searching for any information about that program.

Hope one day I will be possible to test this program. It sucks that we just can't test it. It's like buying empty bag!

I hope someone will crack it.

All the best to all.

[boss151]

.........................

[michi84]

i can do that, by lpt"key" conector, update to full v3,75

please give us some details what you mean with that?

[boss151]

..........

[dieseltechnika]

Do you know something about any new updates in CarProg next year ?

[PremierD]

If anyone is interested I have solution how update carprog to full version

OK mate ... I'll bite ,how do you do it then .............?

[obdmaster]

Me too also very interested in getting full carprog.

[fifas2010]

Me too !!
" solution how update carprog to full version "

[obdmaster]

Me too !!
" solution how update carprog to full version "

How then m8?

[adam28]

There is a solution for update to full version some Twat is selling for 1000euro lol

[impactops]

What is the latest version of Carprog now?
On there website it's 3.89

[milanoffracing]

There is a solution for update to full version some Twat is selling for 1000euro lol


Yes, but I think after that your tool will be cloned and can not be updated anymore. :thefinger:

[domel45]

new version 3.96


http://uploading.com/files/m2868324/CarProg%2B_v3.96.rar
http://www.fileserve.com/file/8gPsnNH
http://www.enterupload.com/3qlz777ek5s7/CarProg__v3.96.rar.html

[domel45]

Yes, but I think after that your tool will be cloned and can not be updated anymore. :thefinger:

I asked the same question to a person who was this solution for sale, the cost is 500 euro(comeback to original) .

[impactops]

When you right click any of the modules there is a set, remove,change password setting, what is this for?

[dieseltechnika]

Yes, but I think after that your tool will be cloned and can not be updated anymore. :thefinger:

You probably don't know that CodeCard company stops sell CarProg device from January 2011. You will have to buy new device and after that You can do updates :).

[dieseltechnika]

I asked the same question to a person who was this solution for sale.

[autobezt]

Hi everyone

I have this tool(hardware) CARPROG,can anyone good at this remove the protection to open all modules???
Is this possible?
Lets try and see if anyone can do it with the help of all...
Must be a way of open all of this modules......

I have all details if anyone needs it....

Cheers
Where .lib ?????? ??????? for crack need .lib + device id , say this

[dyc]

"You probably don't know that CodeCard company stops sell CarProg device from January 2011. You will have to buy new device and after that You can do updates"


If true this is a bad news, What about old users who have an old hardware?

[neriuks007]

what about this update? Hardware, software for programming ecu and chip tunning cars (http://www.car-prog.com/?)

[vlk69]

what about this update? Hardware, software for programming ecu and chip tunning cars (http://www.car-prog.com/?)

CAR_PROG without *.lib is for nothing. It is not just about free software(you can download from carprog), it is about library where you have your already buyed colection. I think this library is for every client different.

[obdmaster]

You probably don't know that CodeCard company stops sell CarProg device from January 2011. You will have to buy new device and after that You can do updates :).


Well its nearly JAN 2012 and carprog is still on sale:aetsch:. I have it and its a pretty good tool in my book.

[Meat-Head]

Well its nearly JAN 2012 and carprog is still on sale:aetsch:. I have it and its a pretty good tool in my book.


From what i've heard from the word on the street there only worth max ?200 - even for one that's a year old.

[said alili]

Thanks !
Thanks Thanks

[lotnik34]

Hello i have problem carprog 9.31 brother i got and show something like that --------------------------- Error --------------------------- Unit CRC error. Delete LIB file and make UPDATE -> INTERNET --------------------------- OK ---------------------------

[rui]

Hello i have problem carprog 9.31 brother i got and show something like that --------------------------- Error --------------------------- Unit CRC error. Delete LIB file and make UPDATE -> INTERNET --------------------------- OK ---------------------------



I also have the carprog and it's the same version that you have until the lib file is the same. you have blocked functions and it was said that you were working in full mode ....

[electronistul21]

carprog V9.31 ist same V4.01.have same .lib,nothing more.