audi a6 soft locked

[nikka]

Hi.I try to disable dpf for audi a6 3.0dti 16cp34 1037380431 0281012915 but when write soft with disabled dpf I have dtc (wrong software) I writye back org flash and all is ok.I do same audi one year ago and compare flash with last car and two flash no have difrence.I do not have idea where is the problem I thinks that eeprom is locked.Can anyone help me.
Thanks.

[voltechcar]

disconnect tempersture sensor and differenstial pressure sensor and your problem is gone. Remember !! 3.0 tdi have 3 temp sensor from dpf and all must disconnect !!!!

[maajkii]

Hi.I try to disable dpf for audi a6 3.0dti 16cp34 1037380431 0281012915 but when write soft with disabled dpf I have dtc (wrong software) I writye back org flash and all is ok.I do same audi one year ago and compare flash with last car and two flash no have difrence.I do not have idea where is the problem I thinks that eeprom is locked.Can anyone help me.
Thanks.

If you are to lazy to disconnect sensors ( switch solution always need it ) i can make you file with connected sensors... just let me know.

[nikka]

Hi.Thanks for answer but I try all.with disconected 3-sensors, have this dtc with conected sensors too.The problems is that I change only one bit from flash and have dtc-(wrong software).I cange ecu with another one but new ecu wuth difrence software number and write in new ecu org flash,mpc and eeprom the car start good next I change only one bit for example bit for dpf-swich and again have dtc-(wrong software).If anyone have full bdm file flash,mpc and eeprom to write to my ecu to reslove this problem.
Thanks.

[voltechcar]

read again what I write.... he see temp sensor and show you " wrong software " Check again all sensor, when you have disconnect all sensor this dtc gone.

[nikka]

Hi.Ok can U made file with disabled dpf I will disconect sensors again.And will write your fail.
Thanks.

[bodzio012]

You Off by switch

[nikka]

Thanks mate.Thomorow will try.But U disable only swich without disconected temperature sensors.I try this solutions anymore without succes

[maajkii]

Bodzio make you file with switch same as yours.....
you need disconnect all 3!! Dpf sensors, not from exhaust but from plugs!!
After disconnect DTC about wrong software disappear...

[nikka]

Yes two disabled dpf swich without disabled dtc for temperature sensors but when I write bodzio012 file and disconect 3-temperature sensors will have dtc for temperature sensors or not?

[bodzio012]

All will be ok, just write

[voltechcar]

this is the same file, because you search problem in software??? use your file no need better solution. Disconnect all and works, simply

[nikka]

Thanks forr all help thomorow will write file and will send result thanks again.