Vw polo 2015 TPC disable

[honingkoning]

Guys is it possible to remove tpc in this model.
This is the facelift type (with golf 7 dash)

No error in car and tpc turns on every 3 days
You reset it and after 3 days same story.
Tire press is good, tires all the same.

Wbr Adam.

Btw i have gen vcds

[hid3]

So where's the autoscan?

[honingkoning]

So where's the autoscan?

You want a Total scan of the car with the error active?

Wbr

[hid3]

Please do full car's Autoscan with VCDS and share it

[honingkoning]

Here it is, i put long coding also (last row in the log)

Wbr Adam

would be very grateful for some solution.

[honingkoning]

Some vag guru pls

[honingkoning]

No one Guys?????

[hid3]

I think your best VAG guru is official dealer at this point... There is no documentation on that module, unfortunately

[honingkoning]

I think your best VAG guru is official dealer at this point... There is no documentation on that module, unfortunately

Thanks [emoji1][emoji1][emoji1]

[brend]

This settings in abs modul.
If you want this deactivate ,for this need first coding abs ,cangateway/dash (If istallation list have this)
Better use for this genuine VCDS not china or high qulity Vas and last odis sw.

[honingkoning]

This settings in abs modul.
If you want this deactivate ,for this need first coding abs ,cangateway/dash (If istallation list have this)
Better use for this genuine VCDS not china or high qulity Vas and last odis sw.

If i pit coding from dash/abs/gateway can you help me?
I have ori vcds So should be ok

Wbr

[ghostrider72]

Dash and gateway wont be a problem as you should have coding helper files

Abs will problem be as there is no helper files for it. You can try to contact Ross Tech support for that one.