PDA

View Full Version : 308 2017



leno26
29th June, 2018, 03:16 AM
I was wondering if someone could help. I'm currently doing a 308 2017. It has a Delphi bsi which I have a program to change but I can't change the dash mileage. It has a s93c86. Keep getting odd readings direct with my DP4. Pulled a dump just using the eeprom programmer function. Need it to 0 miles so it will take the bsi mileage once changed.


Any help would be greatly appreciated.

Dr. Zoidberg
29th June, 2018, 04:15 AM
I was wondering if someone could help. I'm currently doing a 308 2017. It has a Delphi bsi which I have a program to change but I can't change the dash mileage. It has a s93c86. Keep getting odd readings direct with my DP4. Pulled a dump just using the eeprom programmer function. Need it to 0 miles so it will take the bsi mileage once changed.


Any help would be greatly appreciated.km ori is???? try



http://www.digital-kaos.co.uk/forums/announcement.php?f=174&a=32



538698

clusters
29th June, 2018, 04:18 AM
Try reading again as 16 bit, your file looks bad.

Warning! If you overwrite your eeprom before getting a good read you will corrupt it and be looking for a new dump which may not be easy to find.

leno26
29th June, 2018, 09:32 AM
Thank you both. Sorry for missing details. They are as follows..

2017 Peugeot 308 gt line
s93c8 + d70f3421
pulled dump using dp4
26407 riginal miles.

I'll pull a dump with carprog and compare with the original before writing anything.

leno26
29th June, 2018, 07:12 PM
Hi again. I've been back to the car and pulled another dump. This one with carprog and its different to the dp4 one. Details as follows...

peugeot 308 2017
s93c86 + d70f3421
Used carprog to read the file
original miles 26510/42663 km
would like 0 miles so it can take from the bsi.

Very much appreciate any help

Dr. Zoidberg
29th June, 2018, 07:16 PM
Hi again. I've been back to the car and pulled another dump. This one with carprog and its different to the dp4 one. Details as follows...

peugeot 308 2017
s93c86 + d70f3421
Used carprog to read the file
original miles 26510/42663 km
would like 0 miles so it can take from the bsi.

Very much appreciate any helpDash





538881

leno26
30th June, 2018, 09:44 PM
Worked a treat. Thank you very much