View Full Version : Touareg 3.0 TDI swirl flaps
gejzaslapka
1st July, 2018, 04:30 PM
Hello to all,
can someone please disable swirl flaps? My swiftec still crashes :-(
Touareg 3.0TDI EDC16CP34
many thanks in advance
GS
flashtech
1st July, 2018, 05:08 PM
Hi!
Here You are.
gejzaslapka
1st July, 2018, 05:34 PM
Thanks, but MIL still on, any errors stored, any difference if Swirl flaps motor connected or disconnected MIL still on
GS
flashtech
1st July, 2018, 05:39 PM
What dtcs you had before writing this file?
This solution is tested many times.
EDIT. Try this one, pass is the same.
gejzaslapka
1st July, 2018, 06:14 PM
unfortunately still the same........ error code with original bin 004120 - P1018 - Intake manifold runner bank 2 - lower limit not reached (one motor is bad i tried to swap them)
Ignasvw
1st July, 2018, 06:23 PM
Unplug both flaps motors plug. 100%working
gejzaslapka
1st July, 2018, 06:47 PM
MIL STILL ON :banghead:
still the same
flashtech
1st July, 2018, 07:03 PM
Did you really unplugged both motors?
Last try. Password the same.
Ignasvw
1st July, 2018, 07:49 PM
Lol its impossible . Delete foults, keep plugs unpluged
gejzaslapka
2nd July, 2018, 01:01 PM
tested 7 versions....... all is working with disconnected plugs, only MIL still ON :beheaded:
johak
2nd July, 2018, 02:33 PM
another one
AVDigitale
2nd July, 2018, 07:38 PM
try this and report don't disconnect actuators pass in PM!
gejzaslapka
3rd July, 2018, 08:37 PM
So guys, today i did anything , only seat to car , start engine and Check Engine Light goes off
I thank you all for support many times, you were all amazing :congrats:
johak
3rd July, 2018, 09:57 PM
friend, did you test my file?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.