Touareg 3.0 TDI swirl flaps

[gejzaslapka]

Hello to all,

can someone please disable swirl flaps? My swiftec still crashes :-(

Touareg 3.0TDI EDC16CP34

many thanks in advance

GS

[flashtech]

Hi!
Here You are.

[gejzaslapka]

Thanks, but MIL still on, any errors stored, any difference if Swirl flaps motor connected or disconnected MIL still on

GS

[flashtech]

What dtcs you had before writing this file?
This solution is tested many times.

EDIT. Try this one, pass is the same.

[gejzaslapka]

unfortunately still the same........ error code with original bin 004120 - P1018 - Intake manifold runner bank 2 - lower limit not reached (one motor is bad i tried to swap them)

[Ignasvw]

Unplug both flaps motors plug. 100%working

[gejzaslapka]

MIL STILL ON :banghead:

still the same

[flashtech]

Did you really unplugged both motors?

Last try. Password the same.

[Ignasvw]

Lol its impossible . Delete foults, keep plugs unpluged

[gejzaslapka]

tested 7 versions....... all is working with disconnected plugs, only MIL still ON :beheaded:

[johak]

another one

[AVDigitale]

try this and report don't disconnect actuators pass in PM!

[gejzaslapka]

So guys, today i did anything , only seat to car , start engine and Check Engine Light goes off

I thank you all for support many times, you were all amazing :congrats:

[johak]

friend, did you test my file?