PDA

View Full Version : Ford Explorer 2016 - HELP with dash calc please !



j81
7th July, 2018, 02:28 AM
I have this 2016 Ford Explorer i need it to be at 36700 Miles.

Currently it displays 47501 Miles.

it is a 93C86 SOIC.

Thank you very much .

Dr. Zoidberg
7th July, 2018, 02:35 AM
I have this 2016 Ford Explorer i need it to be at 36700 Miles.

Currently it displays 47501 Miles.

it is a 93C86 SOIC.

Thank you very much .
Read it again, that is not good...

jjservice
7th July, 2018, 02:40 AM
I think your file is bad mate.....

Sent from my SM-J710GN using Tapatalk

j81
7th July, 2018, 02:45 AM
i just read it again - here is the dump

j81
7th July, 2018, 03:27 AM
here is a read with carprog

letalcrudo
7th July, 2018, 04:46 AM
next time read out from pcb.

j81
7th July, 2018, 05:24 AM
CHIP READ - REMOVED EEPROM FROM BOARD

carbandit
7th July, 2018, 05:43 AM
try this and report ....

j81
7th July, 2018, 06:01 AM
i am getting a verify error
540479

Cardiag.ru
7th July, 2018, 07:13 AM
desolder eeprom from pcb and read

j81
7th July, 2018, 07:22 AM
ok here it is ,,,, solder off cluster red using upa

Safety
7th July, 2018, 07:41 AM
ok here it is ,,,, solder off cluster red using upa


wrong read. I think your dump is corrupt. here correct example dump.

j81
7th July, 2018, 07:44 AM
wrong read. I think your dump is corrupt. here correct example dump.


would you be able to make it with 36700 miles ?

vageric
7th July, 2018, 09:12 AM
you can try this and report

j81
8th July, 2018, 01:42 AM
you can try this and report

it worked except it is showing up as 3697.7 miles. photo attached ..

i also have 2 error codes .. blind spot monitoring system and cross traffic ... i tried to reset the codes using forscan .. no luck but that i will play with later ...

any chance you could edit the file ?
540658
thank you !

clusters
8th July, 2018, 01:54 AM
He missed a decimal place, and it would never count up properly anyways.

Here..........