View Full Version : FIAT PUNTO 1.3 MJD8F3 DPF OFF
NORSHAN
8th July, 2018, 06:49 PM
Hi Mates. I need dpf off for MY 2014 1.3JTD 00 PS. ECU MJD8F3
i try more than 2 soultion work little then get off
trusted soultion please
macako6
8th July, 2018, 07:11 PM
file can not be downloaded
NORSHAN
8th July, 2018, 07:15 PM
uploaded again
macako6
8th July, 2018, 07:17 PM
OK , now ok
carbon7319
8th July, 2018, 07:18 PM
No problem with download.:star:
AVDigitale
8th July, 2018, 07:39 PM
reset dpf soot and oil service pass in PM!
macako6
8th July, 2018, 08:05 PM
Here's your DPF OFF Punto
first you have to reset DPF 0%
:wink:
macako6
8th July, 2018, 08:18 PM
Always do the procedure dpf replacement and reset parameters with ori file. then load this
NORSHAN
9th July, 2018, 06:10 PM
so thanks friend all soultion didnt work rpm 3000 only dtc found p1564 all dpf sensor disconncted
pike
9th July, 2018, 07:02 PM
Hi, your SW number refers to the Fiat Doblo, did you confuse anything?
macako6
10th July, 2018, 08:57 AM
so thanks friend all soultion didnt work rpm 3000 only dtc found p1564 all dpf sensor disconncted
I have tried this SW and worked well, did not report any error (all sensors stay connected)
NORSHAN
10th July, 2018, 02:28 PM
any body has trustrd soultion
dtc p1564
p2002
p1302
p2452
p1206
and rpm cant excced over 4000 rpm
macako6
10th July, 2018, 03:26 PM
Try this file
same pass
NORSHAN
11th July, 2018, 12:33 PM
so thankh freinds all soultion above didnt work car in limpe home mode rpm 3000
any trusted and tested soultion please
TuningInside83
11th July, 2018, 01:22 PM
Write this
Pass PM
NORSHAN
11th July, 2018, 01:48 PM
didnt work same problem p1564 rpm 3000
TuningInside83
11th July, 2018, 04:28 PM
to delete the dtc P1564 you have to reset the clogging state of the dpf. this can be done by putting the original file and starting a regeneration forced by diagnosis. obviously the dpf must be mounted on the car
NORSHAN
11th July, 2018, 10:30 PM
to delete the dtc P1564 you have to reset the clogging state of the dpf. this can be done by putting the original file and starting a regeneration forced by diagnosis. obviously the dpf must be mounted on the car
I do all that abve no succes
pike
12th July, 2018, 04:49 AM
didnt work same problem p1564 rpm 3000
your dff off solution still controls the particulate filter.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.