opel cd30 mp3 antiteft can 95640

[rtvservis]

nead code to pair with display
car pin is 4868
nead pin of radio or reset

[shooting]

nead code to pair with display
car pin is 4868
nead pin of radio or reset

Post display dump

wbr

[rtvservis]

it is displey code same for immo code or diferent

[shooting]

it is displey code same for immo code or diferent

Post display dump

wbr

[rtvservis]

displej dump 93c56 16bit

[shooting]

displej dump 93c56 16bit

Read in 8bit NOT 16bit

wbr

[rtvservis]

readed ok normal

[shooting]

readed ok normal

Use this radio dump and pair using 2679

wbr

[rtvservis]

not pass stell radio safe .
eror frame from component recive

[shooting]

not pass stell radio safe .
eror frame from component recive
Did you use my dump?

wbr

[rtvservis]

yes an tray to pair in radio .

[shooting]

yes an tray to pair in radio .

Problem is with your tool, what tool are you trying with?

wbr

[rtvservis]

opcom . tool duit befor

[shooting]

opcom . tool duit befor

There are 100's of OPCOM's, which one do you have?

wbr

[rtvservis]

opcom is good. on displey parametar 2ting
securty weit time / in progres
reamaining sec code inputs / 0
meybee tu match tray i whel weait sam time

[shooting]

opcom is good. on displey parametar 2ting
securty weit time / in progres
reamaining sec code inputs / 0
meybee tu match tray i whel weait sam time

OPCOM is your problem, is it cheap Chinese clone?
Radio and display dump are ready for pairing

wbr

[bank]

securty weit time / in progres
reamaining sec code inputs / 0


It’s already blocked [emoji4]
You’ll need another one dump for display

[shooting]

It’s already blocked [emoji4]
You’ll need another one dump for display
A true OPCOM can just reset it when pairing, he must have a cheap tool

wbr

[bank]

A true OPCOM can just reset it when pairing, he must have a cheap tool

IMHO, It doesn't matter what kind of opcom will be used, chinese or original.
In most cases all depends on can-bus configiration and status of "security wait time".
I think any type of opcom can activate protection if configuration and conditions are correct :)

[shooting]

IMHO, It doesn't matter what kind of opcom will be used, chinese or original.
In most cases all depends on can-bus configiration and status of "security wait time".
I think any type of opcom can activate protection if configuration and conditions are correct :)

It matters, Chinese don't have wait reset option

wbr

[bank]

It matters, Chinese don't have wait reset option

What is “wait reset option”?

[budata]

[QUOTE = rtvservis; 3324228] opcom е добро. на дисплей параметър
2тиране на времето за сигурност / в
прогрес възстановяване на сек кодове вход / 0
meybee tu таблица на масата i whel weait sam време [/ QUOTE]


use this file with code 0428 https://1drv.ms/u/s!An2tr1M8gwVrjgNqgJqXmBIq-gQ2