edc17c35 bmw 118d 122cv

[marcomomma]

today I tried to write with kess clone 2.47 5.017 my BMW118D 122CV
......... I BLOCKED THE ECU
reading made it complete


in the writing he failed.


my kess is broken I have this ecu not writing it?


I'm disheartened.

check the files
I want to know if it's my fault or my kess

[voltechcar]

you write by obd edc which have otp, write orginal and car start, this is edc17cp02, c09?

[macako6]

Not EDC17, this is EDC16C35. restore the original file and will start
Just be careful, the battery voltage must be approximately 13V , Maybe this is why KESS incorrectly read or write.

[goyodesanctis]

Normally with BMW and kess, people don't know the key position, just for contact S. You have to press start button without pressing clutch pedal and cluster show you all the lights but car doesn't start.
This is contact position. I had a similar error with a BMW E90.
Regards!

Enviado desde mi Hisense L671 mediante Tapatalk

[maajkii]

Normally with BMW and kess, people don't know the key position, just for contact S. You have to press start button without pressing clutch pedal and cluster show you all the lights but car doesn't start.
This is contact position. I had a similar error with a BMW E90.
Regards!

Enviado desde mi Hisense L671 mediante Tapatalk


exacly!!
i have same situation last month with E92 i tell customer to turn ignition ON but he do it with brake pushed!
lucky genius make recovery.

[sdtsedat]

Write this ecu with fgtech.
Kess is also good, but sometimes it will fail with checksum..

Read here on members how much tuners make this situation with kess.

I can hear that someone will give reaction "i do always with kess and works fine"

Yes i believe, but its true..

Verstuurd vanaf mijn SM-G955F met Tapatalk

[marcomomma]

guys, thank you all
the problem is that the writing did not complete it.
I tried to write but he gave me
wake up error.


the car is mine I turn it on with the clutch pressed
I do not understand what you mean or is


why is writing blocked?
my kess fault?
my fault?


did you check my file?

[maajkii]

guys, thank you all
the problem is that the writing did not complete it.
I tried to write but he gave me
wake up error.


the car is mine I turn it on with the clutch pressed
I do not understand what you mean or is


why is writing blocked?
my kess fault?
my fault?


did you check my file?

Probably some totally china tool.
I think Its 50/50 Your And tool fault ;)


Wysłane z iPhone za pomocą Tapatalk

[bersch8688]

Remove ECU and post BDM dump ;-)

[marcomomma]

thanks bersch
the ecu is sheltered by a friend.
my problem is the kess clone


I did not understand if it's good or if it's broken


I'm afraid to write another ecu ...