PDA

View Full Version : Opel Astra H 1.7 CDTI 110hp



JTDperf
17th July, 2018, 07:51 AM
Hello,

what is a safe tool to read Astra H 1.7 CDTI 110 hp since kess has grey protocols on it?

mancioks
17th July, 2018, 08:03 AM
Hello,

what is a safe tool to read Astra H 1.7 CDTI 110 hp since kess has grey protocols on it?

kess 5.017 china red pcb does it ok.

Mr BLACK
17th July, 2018, 09:59 AM
if is denso ecu ....i use mpss to read and write ...and no problem

JTDperf
17th July, 2018, 11:18 AM
I could acces mpps v12 but not sure if that reads all data.I dont wanna lose injectors code or other horror stories I heard.

morfej
17th July, 2018, 11:20 AM
mpps v18.... V12 is too old.

KESS can read eeprom as well, so it is a bit better concerning the "saftey".

JTDperf
23rd July, 2018, 07:17 PM
It seems like the ecu is EDC16c9 with no read by kess.

Is it ok to get ID , download full BDM then write by OBD?

mancioks
23rd July, 2018, 07:25 PM
Read/Write with mpps!!! :)

kalisiux
23rd July, 2018, 09:21 PM
It seems like the ecu is EDC16c9 with no read by kess.

Is it ok to get ID , download full BDM then write by OBD?
I read and wrote edc16c9 a few times using kess china clone. every time without a problem

Happy786786
24th July, 2018, 12:21 AM
Yes china Kess should be fine I’ve done a few so far Tanx to God no issues whatsoever


Sent from my iPhone using Tapatalk

mancioks
24th July, 2018, 04:20 AM
Kess never read edc16c9. C39 ok, but c9 is only write.

kalisiux
24th July, 2018, 08:11 AM
Kess never read edc16c9. C39 ok, but c9 is only write.

you're right. sorry for misleading. I read edc16c39. human memory can be unreliable

JTDperf
25th July, 2018, 09:34 AM
Tried with kess and..

WARNING
an error occurred during the writing.

I got this error during OBD and ecu bricked .

Hope it can recover by BDM

No recovery works by OBD since all of tries succed in same error.ID was ok

mancioks
25th July, 2018, 09:38 AM
It also can be recovered with SPS done with Tech2 or Mdi.

JTDperf
25th July, 2018, 08:10 PM
No result even with BDM.File has checksum ok,but car does not start....this is horror ecu ...Does not even ID