PDA

View Full Version : KTMOBD and KTMFLASH china clone



OVERSPEED
20th July, 2018, 08:58 PM
Do you heard about these ?

You clearly see itīs PCMFLASH SW, and probably a J2534 device (tactrix clone)

mamanacusa
27th August, 2018, 05:02 PM
You tested it?

moky
27th August, 2018, 07:09 PM
I saw on others forum bugs when flash but not tested...

OVERSPEED
28th August, 2018, 05:13 PM
No, allways wait for DK users to "aprove" before buy..

philipcoin
29th August, 2018, 04:41 PM
you can check the difference ktmflash and pcmflash

http://blog.obdexpress.co.uk/2018/06/29/pcmflash-original-vs-clone-read-write-ford-ecus/

also pcmflash powerbox chines have ktmflash jtag powerbox

smik
29th August, 2018, 09:23 PM
Hi all Ive tried to ktm on some old dsg units here and it work ok
But I had to use a genuine tactrix cable

3abas27
30th September, 2018, 01:10 PM
Hi
Tactrix clone not work ?

moky
30th September, 2018, 04:45 PM
I had one for other software and work very bad.. need to buy official..

moky
30th September, 2018, 04:45 PM
users of ktmflash on tricore here? does it work fine?

moky
30th September, 2018, 09:04 PM
just ordered one ktmflash, will test on some tricore ecu and send report here soon.

norman1967
30th September, 2018, 09:54 PM
Excellent looking forward to your review

moky
20th October, 2018, 02:17 PM
As promise i received ktmflash + powerbox tested on edc17C10 and work fine with this tactrix clone.
checksum ok all ok ,read write rapid , excellent :D
will test GPT and dsg soon but I think will work.

norman1967
20th October, 2018, 05:05 PM
Moky
So your tactrix is connected to the rear of the power box?
And then to laptop via the usb?

Just use ktag pinout?

I thought edc17c10 was GPT!

moky
20th October, 2018, 05:08 PM
hi yes tactrix connected to the rear of the power box and in front gpt and tricore cable,cable gpt and tricore ktag seems to be ok and help of dimsport or ktag yes
good box

moky
21st October, 2018, 02:39 PM
tested on edc17cp14 R/W chk ok

alclot
29th January, 2019, 10:03 PM
Hi mate. Did you test VAG DSG/CVT with this clone? About software: Can we install on Windows 7 without internet or doesnt matter?
Thanks in advance ;)

moky
29th January, 2019, 10:29 PM
hi

tested on dsg and work fine (not tested by obd2) and you can use with windows 7 with no internet connexion (not tested with connexion)..

this clone work same as ori with good tactrix hardware

Jerak
30th January, 2019, 07:23 PM
Thanks moky.
I have zero programming tools for my EDC17CP44-TC1797 (except VCDS).
I have watched a few videos on this tool where the eeprom tprot password was read and the eeprom saved.
With this ONE tool can I write to turn off protection and then write a modified 4M ecu flash?

Do I need other equipment or cables?

Really not sure if I need Ktag or Kess or PCMFlash or this.
I really would like a tool that can modify my transmission too.
Maybe in time PCMFlash will be able to do that for my Aisin transmission.

Any help is really appreciated.

hesham10
29th May, 2019, 07:04 PM
Hi mate. Did you test VAG DSG/CVT with this clone? About software: Can we install on Windows 7 without internet or doesnt matter?
Thanks in advance ;)

Yes I tried ,, works perfectly on vag dsg

sepistar
23rd August, 2019, 10:35 AM
Does someone read write dcm3.7 AP with ktmflash?
Also pinout are needed.
Thanks

sepistar
26th August, 2019, 11:57 AM
work fine with ktm obd
read & write
tested by me

carmageddon
26th August, 2019, 02:42 PM
dcm3.7 ap chevrolet - opel its a very simple ecu to do without problem also with kess 2.08 fw 4.036, tested

gijsvm
4th November, 2019, 09:29 AM
Did someone read/write dsg VL381 with this ktmflash tool ?

And can do it EEPROM CHK repair too ?

figani
4th November, 2019, 10:45 AM
And can do it EEPROM CHK repair too ?


pcmflash donīt had the option for eeprom checksum correcting on dsg (only micro)...
ktm... is the crack of pcm...
so it should also not be possible...

manually or by other SW...

marcoco
12th January, 2020, 12:12 AM
hi

tested on dsg and work fine (not tested by obd2) and you can use with windows 7 with no internet connexion (not tested with connexion)..

this clone work same as ori with good tactrix hardware


hi. ktmflash, like original pcm flash can clone ,read flash+eeprom from pinout without open gearbox( vag dqxx)?

moky
12th January, 2020, 04:13 AM
yes on bootmode

vitaliyl
12th January, 2020, 10:42 AM
Does someone read write dcm3.7 VAG with ktmflash?

gijsvm
13th January, 2020, 09:21 AM
Does someone read write dcm3.7 VAG with ktmflash?

I like to know too :-)

sinue0007
16th April, 2020, 06:25 AM
hello I have the ktm flash and clone a DSG OAM if I could read and write the files but when installing it in the car there is an error in the software that error I could have made

robert1232
16th April, 2020, 06:42 AM
read and write no problem EDC17c50 from BMW F30 320d 135KW

pinotec
7th August, 2020, 04:12 PM
someone has tested ktmobd 1.94 with dcm3.7 vag ?
I had read that there are problems with checksum


confirmed?

datapage
6th October, 2020, 11:02 AM
I need the KTMOBD 19 IN1 SOFTWARE.
There was no cd.
Can anyone have it?

moky
6th October, 2020, 12:55 PM
here version 1.1.94 obd

moky
6th October, 2020, 12:56 PM
someone has tested ktmobd 1.94 with dcm3.7 vag ?
I had read that there are problems with checksum


confirmed?

no dcm 3.7 on china clone 1.94...

2xded
6th October, 2020, 01:52 PM
New KTM EMT (programmer upgrade version of KTMOBD KTMFLASH KTM-Bench Multi-Flasher)
1005001526585260 to the search bar

datapage
6th October, 2020, 02:57 PM
[QUOTE = moky; 3968741] sem dcm 3.7 no clone chinęs 1.94 ... [/ QUOTE]
hi moky ktmobd version 1.20 ,
my ktmobd version 1.20 that doesn't work.

datapage
7th October, 2020, 12:33 PM
Still in need of ktmobd v1.20 software.
If anyone can help.

preludio
26th November, 2020, 02:46 PM
Hello is necesary dongle usb for this ?

here version 1.1.94 obd

https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/misc/paperclip.png Attached Files

https://www.digital-kaos.co.uk/forums/images/styles/DarkCore/attach/rar.gif pcmflash 1.1.94 obd.rar (https://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=750609&d=1601985336) (3.53 MB, 18 views)

moky
26th November, 2020, 03:50 PM
of course you need dongle for this sw

danielectronic
13th December, 2020, 10:49 PM
anyone know something about new ktmflash clone tool, updated version 3 in 1 new name EMT ecu master tool

crouchinggerbil
13th December, 2020, 11:21 PM
anyone know something about new ktmflash clone tool, updated version 3 in 1 new name EMT ecu master tool

For the price (https://www.aliexpress.com/item/1005001470700242.html?aff_platform=link-c-tool&sk=6YaRvLi&aff_trace_key=c166203e56c94a7594ebd2ac91b4b96b-1607898034067-03196-6YaRvLi&terminal_id=b0201b35eb4741528c24331057d4a33a&tmLog=new_Detail) it would want to be good

galiza
29th December, 2020, 09:57 PM
There is any version without dongle?

figani
30th December, 2020, 07:56 AM
There is any version without dongle?

No....................

sonny21
20th January, 2021, 07:00 PM
someone know which modules avaible in Ktmflash ?

carmageddon
20th January, 2021, 07:56 PM
ktm bench have only module 53 and 71

moky
20th January, 2021, 08:55 PM
and Ktmflash have gearbox dsg and tricore module

sonny21
20th January, 2021, 10:34 PM
i thought all modules or most of them avalable...

galiza
3rd March, 2021, 10:57 AM
No....................
And....What about AlexFlasher? It seems to be the solution to work without dongle. Isnīt it?

figani
3rd March, 2021, 11:23 AM
And....What about AlexFlasher? It seems to be the solution to work without dongle. Isnīt it?


yes, cloned and cracked version sold by thief Oleg Maslov works without dongle...

Bmwpower530
13th March, 2021, 01:50 PM
Worth to get it for vag dsg/cvt read/write cloning? Lookinkg tool for that.