PDA

View Full Version : 2006 Ducati 848 all keys lost MC908LJ24 in cluster


techterr
23rd July, 2018, 07:07 PM
Hello DK,
Wondering if anyone has had luck with the 2006 Ducati 848 that has a digitek dash with the motorola MC908LJ24 chip? mask CFQE... Not finding any info on this dash..
There is no 24Ci6 or any 8 leg chip for that matter in the cluster... The ECU is 59MAS, I can read this with Galleto, but have not found a program to immo off..
Any ideas are welcome..
Thanks in advance..
DCT748
23rd July, 2018, 08:01 PM
I think you made mistake it's not a ducati 848 superbike dash, but probably a ducati Monster (with digitek dash).

hard to read, the easiest way is to make an immo off on the ECU 59M

I think I can do the immo off, post dump
techterr
23rd July, 2018, 08:52 PM
Thank you....
DCT748
23rd July, 2018, 09:52 PM
done

the file corresponds to a ducati 800SS or M800
techterr
23rd July, 2018, 10:54 PM
Thank you sir, I will try and report...
techterr
28th July, 2018, 01:48 AM
Thank you again... I am pretty sure this worked... Cust didn't start bike while I was there, I guess it needed oil and gas.... If it didn't start, I am sure he would have called me..
Thanks again...
Hamiltonlock
10th January, 2021, 07:33 AM
Hey. I’m working on the same dashboard with the MC908LJ24 chip and need to program a key. I seen your post a while back on this. Can you perform a IMMO off for me on this dashboard if I send you the dump?

Thank you,
Ryan
f2f2
10th January, 2021, 01:29 PM
flash Reading with correct SS
techterr
11th January, 2021, 03:47 AM
you know, these guys, especially DCT748, know more about these bikes than anyone... He sent me a file that I wrote to the ECU, one from an earlier bike that had the same motor, then I put a piece of tape over the immo light in the dash.. Hopefully one of these guys can help you... I used Scooter Workshop by LA Cartech to read and write the ECU. It looks like f2f2 might be able to actually put a key into the dump.. If not, I will search my computer for the file for the ECU..
DCT748
11th January, 2021, 08:51 PM
Immo off in ECU, not in dash
(Or make red key with dash file)
techterr
12th January, 2021, 03:45 AM
See, I knew these guys could do it... I can tell you that DCT748 has helped me out on Ducatis enormously....
Hamiltonlock
12th January, 2021, 06:39 AM
Ok great thanks so much. I working on reading the dump of the cluster now. DCT748 do you know which software or how to program the chip?

To be of my programs seem to have the algorithm.. tango,tmpro,vvdi,about to check Abrites now..

I really appreciate your guys help. I can remove ecu from bike and send over dump file maybe to turn Immo off as a last resort.

Take care,
Ryan
DCT748
12th January, 2021, 10:41 PM
Orange5 can read, and after you have to find and make red key
not easy way and need knowledge
immo off on ECU file more easy
bearheroes
12th January, 2021, 10:42 PM
If you read file post dump
techterr
13th January, 2021, 04:49 PM
Ok great thanks so much. I working on reading the dump of the cluster now. DCT748 do you know which software or how to program the chip?

To be of my programs seem to have the algorithm.. tango,tmpro,vvdi,about to check Abrites now..

I really appreciate your guys help. I can remove ecu from bike and send over dump file maybe to turn Immo off as a last resort.

Take care,
Ryan

I can't remember, but I had issues trying to read the cluster.. I opted to turn the immo off, OK, DCT748 was nice enough to turn the immo off for me:redface-new::redface-new: