Intake swirl flaps off L200

[TuningInside83]

Hi friends
I need help for swirl flaps off for Mitsubishi L200
This is Original file + original eeprom + backup + ID + photo

Can you help me?

Thanks

[TuningInside83]

DTC is P0089

[TuningInside83]

Up!!!!!!!!

[bobolin4o]

Test this, if you want...


P.S.
''TuningInside83 has exceeded their stored private messages quota and cannot accept further messages until they clear some space.''
Only 93 posts, and FULL PM Box...
So, read my signature and suffer!

[TuningInside83]

Thank you
I have deleted some messages

[TuningInside83]

Test this, if you want...


P.S.
''TuningInside83 has exceeded their stored private messages quota and cannot accept further messages until they clear some space.''
Only 93 posts, and FULL PM Box...
So, read my signature and suffer!


private message free

[mihaiservice]

Hi
dtc P0089 are from swirl flaps ? :shot:

[bobolin4o]

Of course is not...
But anyway, he thinks, that every problem with the engine can be repaired with ''DTC off''.
Or he just want the car to go away ASAP...
------------------------
Here is the file, test it.

[TuningInside83]

This is dtc off...
I need swirl flaps off

[bobolin4o]

First of all, P0089 is not for swirl flaps, it is for fuel pressure regulator.
Second, in Denso ECUs is enough to delete the dtc for egr, swirl and whatever, so you can disconnect the faulty component without limp etc.
And finally... you are the one, who want help here, don't be so smart and hear what the people says...
So, disconnect the swirl motor and give the error codes here.

[TuningInside83]

OK thanks,
I'll try to unplug the socket and read the dtc

[TuningInside83]

I wrote the @bobolin4o file. the dtc P0089 on the L200 refers to the swirl flaps valve on the intake manifold. By deleting the DTC the problem has been solved. Thank you all.