RNS 310 Read with J-link

[clauberty]

Connecting ...
- Connecting via USB to J-Link device 0
- J-Link firmware: V1.20 (J-Link ARM V8 compiled Jun 19 2012 11:29:30)
- Using adaptive clocking instead of fixed JTAG speed
- Initializing CPU core (Init sequence) ...
- Initialized successfully
- Using adaptive clocking instead of fixed JTAG speed
- J-Link found 3 JTAG devices. Core ID: 0x0692602F (ARM9)
- Flash ID (Chip 0) = 0x1227E (Verified)
- Connected successfully



- Connected successfully
Reading selected sectors ...
- 1 of 512 sectors selected, 1 range, 0x3F60000 - 0x3F7FFFF
- ERROR: RAM check failed @ address 0x00000020.
- ERROR: Write: 0x23222120 27262524
- ERROR: Read: 0xEAFFFFFE EAFFFFFE
- ERROR: (32 bytes of RAM have been checked successfully)
- ERROR: Failed to read back target memory
Disconnecting ...
- Disconnected




what command to give next :chuncky:
https://uploads.tapatalk-cdn.com/20180724/60e64a7bd1d28fc47758560f4b0cc31a.jpghttps://uploads.tapatalk-cdn.com/20180724/907284bf3394033ba46f05590fa40d1c.jpghttps://uploads.tapatalk-cdn.com/20180724/5672d7cce8fd1e8d3dcc5da16f663716.jpghttps://uploads.tapatalk-cdn.com/20180724/3d517b177e78cd5aa6525af49b460d28.jpghttps://uploads.tapatalk-cdn.com/20180724/7d7c977dc512fad87250f3a4de525ccf.jpg

[clauberty]

Finally read :victorious: after 2h

hope that read is ok

please i wold need pin code

Thank you

[smoggy]

try code 0524

[A3fDevil666]

Hello can u Share Connection Pics ?

[clauberty]

attached connection points

[Golfwagen]

hi all. I have same problemm .... help :) Navi - Skoda RNS310. help with idea