PDA

View Full Version : ECU MITSUBISHI LANCER


teris
21st November, 2009, 07:55 PM
Hello!! I have a Mitsubishi Lancer 1,3cc., 1999 year.
It has an engine Ecu.. MD347016 and it has problem inside.
Anybody knows, where I can found the inside diagram of ECU to repair it?
Thnks!!:wink:
Meat-Head
22nd November, 2009, 12:42 AM
the word from 'them upstairs' is in the middle of the circuit board to some capacitors, change these for new ones and if it still don't start, either it wasn't that or it has another fault.

DKDC
teris
22nd November, 2009, 12:52 PM
the word from 'them upstairs' is in the middle of the circuit board to some capacitors, change these for new ones and if it still don't start, either it wasn't that or it has another fault.

DKDC
Thanks for your answer,but I d like to find this diagram because I know where is the inside problem (resistance) but I dont know how much Ohm I must use to replace the bad resistance.
:hmmmm:
cristec
22nd November, 2009, 01:25 PM
AS Meat-Head said there are two electrolytic capacitors in the middle of the circuit board, these usually leak or the tops will be bulging change these.
You must replace them with 105c rated ones.
From memory I think they are 47 mfd 50 volt and 100 mfd 16 volt.

HTH
teris
27th November, 2009, 12:47 PM
Hello!! I have a Mitsubishi Lancer 1,3cc., 1999 year.
It has an engine Ecu.. MD347016 and it has problem inside.
Anybody knows, where I can found the inside diagram of ECU to repair it?
Thnks!!:wink:
cristec
27th November, 2009, 05:54 PM
Hi I doubt very much that you will find an internal wiring diagram for this.
keymaker.gr
31st January, 2015, 11:35 AM
Hi all does anyone knows how to immo off this type of ecu ??
thanks in advance
Starling_vit
31st January, 2015, 11:44 AM
Hi all does anyone knows how to immo off this type of ecu ??
thanks in advance
edit dump MCU with tactrix openport, for example.
keymaker.gr
2nd February, 2015, 10:20 AM
edit dump MCU with tactrix openport, for example.

thanks for the quick reply....but i need to immo off cause my customer just bought only the engine with the ecu to put it in a different car....soo no immobox....

If you can help me with immo i will be greatfull my friend ...!!!
Starling_vit
3rd February, 2015, 05:07 AM
thanks for the quick reply....but i need to immo off cause my customer just bought only the engine with the ecu to put it in a different car....soo no immobox....

If you can help me with immo i will be greatfull my friend ...!!!
read dump MCU and post here